This is a used kni-Co brand wall tent stove package. It is the Alaskan model, see photos for size. Comes with 4 chimney sections, a 5″ damper and sleeve, and a 5″ spark arrestor. I got this new in 2014, and have used it many hunting seasons. This works good in the cabelas alaknak style wall tents or similar. The condition is “working” there is a dent on the corner, see photos, and lots of surface rust which is normal. The stove comes with a damper sleeve, and chimney spark arrester and 4 pipe sections. All of it is good enough to get you by. But I would reccomend replacing the damper sleeve and spark arrestor, because both of them are worn out and basically ready to be replaced. The damper sleeve has been tack welded together a few times, and is barely workable. I have included photos of the damper sleeve and spark arrestor I would replace on this setup to keep it going many more seasons. They are available on kni-Co manufacturing website, read below part #’s for both. The stove itself is still solid, feel free to ask any questions you may have. Info from Kni-Co about stove below. For over 30 years. Rugged and large, each stove is handmade in the United States to ensure top quality. T he Alaskan can be set up with attachments on two sides (tables and/or water tanks), tapered pipe, spark arrestor, and a stack robber. The tables can sit on top of the water tanks. Most items fit inside the stove for easy packing and storage. 20″ high, 12″ wide and 24 long. Storage size: 12″ x 12″ x 24″. Fire box size: 11 1/2″ x 10 3/4″ x 22″. Made with 22 gauge cold rolled steel. 5″ stove pipe hole (works with our 5″ tapered pipe). Weight 18 lbs.