8″ Chimney Stove Pipe Stainless Steel SSII Roof Support A Size 8″ B Size 10 8T-RSP. For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2 clearance. Maximum length of chimney which can be suspended below is 20´. Maximum total length is 30´. The Roof Support Kit (RSK) contains; roof brackets and necessary hardware. The Roof Support Package (RSP) contains; one 18 length of pipe, roof brackets and necessary hardware. The brackets may be assembled to any standard pipe length at any desired height. Locking bands must be used at each pipe joint when installing either the RSK or RSP. Please see our About Me Page for Contact Information Sign up for our Newsletter to receive notification of new and sale items. Check out my other items. Please see our About Me Page for more information about us, including Contact Information. We do our best to ensure the accuracy of every listings. Unfortunately, do to our high volume, mistakes sometimes occur. Nilson Hardware Swanville, MN. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Furnaces”. The seller is “nilsonhardware” and is located in this country: US. This item can be shipped to United States.
- Brand: Selkirk
- Model: 8T-RSP
- MPN: 8T-RSP
- Country of Manufacture: United States
- UPC: 00053713131738
Custom automotive appearance and performance upgrades, additions and accessories specializing in all things Land Rover proudly presents. LAND ROVER RANGE ROVER 1 CUSTOM FULL. ROOF RACK, CUSTOM FULL BRUSH GUARD AND CUSTOM FRONT & REAR BUMPERS. PLEASE NOTE: THIS PACKAGE HAS NOT BEEN POWDER COATED YET. I had a 1995 model front bumper and brush guard and wanted to put them to good use so I created a matching package inspired by retro/early Range Rover and Camel Trophy styling. This particular kit is custom and 1 of only 1. This roof rack is 100% custom made and accommodates the mounting of 4 auxiliary lights across the front (2 grouped pairs/Camel Trophy style) as well as 2 auxiliary lights in the rear. The 1995 full width brush guard has been backdated as I modified it to not wrap around the corner lamps and the rubber bumper strips have been replaced with metal. All fabricated components are sandblasted to remove impurities prior to coating, zinc primer base coated and finished in semi-gloss black powder coat (shown in raw steel prior to sandblast, primer and top powder coat). All my tubing bend components are C. Mandrel bent, all tubing joints are pneumatic/hydraulic notched, all seam joints are sleeved, welded and polished. All my mounting and light tabs are stamped. All my components are fixture “jig” clamped during welding to ensure accuracy and consistency and to mitigate warping during the welding process. All tubing is cleaned and polished prior to welding. All welds are gas M. Welded (and I’m damn good at what I do). This package will mount to all Land Rover Range Rover 1 models. Derek Chase, URBAN OFFROAD. The item “CUSTOM LAND RANGE ROVER 1 / CLASSIC FULL ROOF RACK BRUSH GUARD BACKDATED BUMPERS” is in sale since Friday, May 15, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “chasechopshop” and is located in Temecula, California. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Interchange Part Number: Safety devices
- Surface Finish: Powder-Coated
- Brand: URBAN OFFROAD
- Mounting Hardware Included: Yes
Custom automotive appearance and performance upgrades, additions and accessories specializing in all things Land Rover proudly presents. NEW URBAN OFFROAD EXODUS SERIES LIMITED PRODUCTION. LAND ROVER RANGE ROVER 1 CUSTOM FULL. ROOF RACK BASKET w/ GUTTER MOUNTING ROOF BARS & ALL STAINLESS STEEL MOUNTING HARDWARE. PLEASE NOTE: THIS RACK HAS BEEN POWDER COATED SINCE THE PICTURES WERE TAKEN/NOT ALL PICTURE SHOW POWDER COAT FINSH. If you want a NAS Defender 90/110 style roof rack basket on your Range Rover 1/Classic here is the kit. This particular kit is custom and 1 of only 1. This roof rack accommodates the mounting of 4 auxiliary lights across the front (2 grouped pairs/Camel Trophy style) as well as 2 auxiliary lights in the rear. (LIGHTS NOT INCLUDED/Are shown for scale/reference). All fabricated components are sandblasted to remove impurities prior to coating, zinc primer base coated and finished in semi-gloss black powder coat (shown in raw steel prior to sandblast, primer and top powder coat). All my tubing bend components are C. Mandrel bent, all tubing joints are pneumatic/hydraulic notched, all seam joints are sleeved, welded and polished. All my mounting and light tabs are stamped. All my components are fixture “jig” clamped during welding to ensure accuracy and consistency and to mitigate warping during the welding process. All tubing is cleaned and polished prior to welding. All welds are gas M. Welded (and I’m damn good at what I do). This rack will mount to all Land Rover Range Rover 1 models. Derek Chase, URBAN OFFROAD. The item “URBAN OFFROAD EXODUS SERIES CUSTOM LAND RANGE ROVER 1 / CLASSIC FULL ROOF RACK” is in sale since Tuesday, May 1, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “chasechopshop” and is located in Temecula, California. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Interchange Part Number: Safety devices
- Surface Finish: Powder-Coated
- Manufacturer Part Number: UOESRR1FRR
- Brand: URBAN OFFROAD
- Mounting Hardware Included: Yes
This spoiler uses the existing OEM brake light. Product will arrive in a smooth primer, ready to scuff & paint. We currently offer FREE UPS Ground Service to the 48 continental states. In the event that you decide not to keep your spoiler, you may return it at your own cost within 14 days. R spoiler will arrive in light gray primer with either the 3M Tape already installed or the bolts drilled directly into the mounting holes. For an easy installation depending on the type of installation required. All Hardware, Template Strips, & Gaskets Included. Manufactured in the U. FREE UPS Ground Service. We currently offer FREE UPS and Fed-Ex Ground Service to the 48 continental states. This Range Rover Full Size spoiler is an DRIL L installation and is made of hand-laid fiberglass. Watch the instructional video on the right for a demonstration. The item “Fits 05-12 UNPAINTED Land Rover Range Rover Full Size Custom Roof Mount Spoiler” is in sale since Tuesday, August 1, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Spoilers & Wings”. The seller is “the.sawtooth” and is located in Dallas, TX. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation, Canada.
- Country/Region of Manufacture: United States
- Material: Fiberglass
- Adjustable: No
- California Prop 65 Warning: Warning: This product contains chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.
- Bundle Listing: No
- Type: Roof
- Color: Unfinished
- Surface Finish: Primed
- Manufacturer Part Number: DAR018
- Placement on Vehicle: Rear
- Brand: DAR Spoilers
- Warranty: 3 Year
- Mounting Hardware Included: Yes
- Attachment Method: Bolts
So the factory roof rails are both rare, and not very good if you wish to use a full platform rack (such as a Front Runner or Rhino); you have to drill the rack + rails + shim it, as the rails are curved to match roof contour vs flat. Only aftermarket was Safety Designs, and (still) Voyager in the US, but that is old tech and both very expensive & hard to find. Pictures are of the first set produced, and there are some variables we can easily incorporate: different finishes (this was semi-gloss powder coating, but matte would look better with FR racks), or you could have it painted or powder coated to (near) match factory finish (black semi-gloss or matte included in price). The one pictured has the rails 1″ taller than “stock” allows for the carrying of a Front Runner table under FR’s rack using their table carrying accessory (this gives about 3″ of clearance at highest point of the roof). As these are built-to-order, if you wanted a lower profile the rails/feet can be fabricated down up to 2.25 if you wanted a low profile. Other options are minor things like the P38 logo can be deleted. Front of the rails have 2 mounting holes and two L brackets are included to allow for mounting a light bar or wind deflector. See my other listing if you just want a set of the plans to fabricate your own. These rails will work with some Thule or Yakima (or similar) racks that have a bottom channel that allows them to be mounted to the rails I would recommend a minimum of three cross bars for rigidity. With a platform rack, the entire system is incredibly solid—a RTT wouldn’t be any issue at all, and I’ve had almost 500lbs up there with zero issues. No cross bars or rack included. You will need to tell me what platform rack you are putting on your P38 as there are slight mounting differences between Rhino, Front Runner, etc. The rack shown is a slightly modified Front Runner LR3/LR4 rack–modification was the removal of 8 of length (about a 30 minute job with a hacksaw + metal file). The item “Range Rover P38 Roof Rails Rack” is in sale since Wednesday, July 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “mikopdah_0″ and is located in Pasadena, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Montserrat, Bangladesh, French guiana, Guernsey, Jersey, Liechtenstein, Monaco, Macao, Martinique, Pakistan.
- Country/Region of Manufacture: United States
- Weight Capacity: 500lbs
- Material: Steel
- Number of Pieces: 4
- Type: Roof Rail Rack
- Features: Adjustable
- Color: Black
- Surface Finish: Powder-Coated
- Manufacturer Part Number: P38RRFR
- Placement on Vehicle: Roof
- Brand: P38 Customs
- Fitment Type: Direct Replacement
- Warranty: 60 Day
- Mounting Hardware Included: Yes