So the factory roof rails are both rare, and not very good if you wish to use a full platform rack (such as a Front Runner or Rhino); you have to drill the rack + rails + shim it, as the rails are curved to match roof contour vs flat. Only aftermarket was Safety Designs, and (still) Voyager in the US, but that is old tech and both very expensive & hard to find. Pictures are of the first set produced, and there are some variables we can easily incorporate: different finishes (this was semi-gloss powder coating, but matte would look better with FR racks), or you could have it painted or powder coated to (near) match factory finish (black semi-gloss or matte included in price). The one pictured has the rails 1″ taller than “stock” allows for the carrying of a Front Runner table under FR’s rack using their table carrying accessory (this gives about 3″ of clearance at highest point of the roof). As these are built-to-order, if you wanted a lower profile the rails/feet can be fabricated down up to 2.25 if you wanted a low profile. Other options are minor things like the P38 logo can be deleted. Front of the rails have 2 mounting holes and two L brackets are included to allow for mounting a light bar or wind deflector. See my other listing if you just want a set of the plans to fabricate your own. These rails will work with some Thule or Yakima (or similar) racks that have a bottom channel that allows them to be mounted to the rails I would recommend a minimum of three cross bars for rigidity. With a platform rack, the entire system is incredibly solid—a RTT wouldn’t be any issue at all, and I’ve had almost 500lbs up there with zero issues. No cross bars or rack included. You will need to tell me what platform rack you are putting on your P38 as there are slight mounting differences between Rhino, Front Runner, etc. The rack shown is a slightly modified Front Runner LR3/LR4 rack–modification was the removal of 8 of length (about a 30 minute job with a hacksaw + metal file). The item “Range Rover P38 Roof Rails Rack” is in sale since Wednesday, July 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “mikopdah_0″ and is located in Pasadena, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Montserrat, Bangladesh, French guiana, Guernsey, Jersey, Liechtenstein, Monaco, Macao, Martinique, Pakistan.
- Country/Region of Manufacture: United States
- Weight Capacity: 500lbs
- Material: Steel
- Number of Pieces: 4
- Type: Roof Rail Rack
- Features: Adjustable
- Color: Black
- Surface Finish: Powder-Coated
- Manufacturer Part Number: P38RRFR
- Placement on Vehicle: Roof
- Brand: P38 Customs
- Fitment Type: Direct Replacement
- Warranty: 60 Day
- Mounting Hardware Included: Yes
Plumbing Vent Pipe, Stack Pipe, Stove Pipe, Mast & Chimney Protector. Protects Vent Pipes, Masts and Chimneys on sloped metal building roofs! Roof Cricket Eliminator for Metal Buildings! The VentSaver HD will fit any roof pitch and an infinite array of pipe sizes from 1″ to 14″ around. Also provided are stainless steel nuts, bolts and heavy duty 1 1/2 lag screws. Fin protects a standing profile of 14. Installation is quick and easy. The VentSaver cuts the snow and ice like a shark fin through water! This ingenious product adds support and strength to your vent pipes, chimneys or a mast while the innovative fin design cuts through and assists in the shedding of snow and ice from your roof. The VentSaver HD Series is made from non-corrosive powder-coated aluminum and stainless steel aircraft cable. The HD series will fit any roof pitch and an infinite array of sizes from 1″ to 14″ around. It’s 14 standing profile is designed to protect taller stacks such as chimneys, gas vents and masts. The beauty of the HD series is the variety of applications it will fit as well as the ease of installation. And does not include the actual stove pipe, chimney cap, metal roof panel or pipe boot in the picture. The item “VentSaver HD Stove Chimney Pipe Protect Metal Roof SnowBreaker” is in sale since Wednesday, December 04, 2013. This item is in the category “Business & Industrial\Construction\Building Materials & Supplies\Ducts & Vents”. The seller is “snoblox” and is located in Mechanicsburg, Pennsylvania. This item can be shipped to United States.
- Brand: VentSaver
- Model: HD
- Country of Manufacture: United States
- Material: Aluminum
5″ To 8″ Galv Rubber Boot Metal Roof Chimney Stove Pipe Flashing Kit 200275. Used for chimney installations on corrugated roofs. Flat to 12/12 pitch. Kit includes rubber boot 23-4/5″ x 21-1/2″, spacers kit, special storm collar engineered for this kit and maximum weather protection and mounting screws. Fits chimneys from 5″ to 8″. EDPM and Galvanized Steel. Please see our About Me Page for Contact Information Sign up for our Newsletter to receive notification of new and sale items. Check out my other items. Please see our About Me Page for more information about us, including Contact Information. We do our best to ensure the accuracy of every listings. Unfortunately, do to our high volume, mistakes sometimes occur. Nilson Hardware Swanville, MN. The item “5 To 8 Galv Rubber Boot Metal Roof Chimney Stove Pipe Flashing Kit 200275″ is in sale since Friday, November 01, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “nilsonhardware” and is located in Swanville, Minnesota. This item can be shipped to United States.
- Brand: Selkirk
- Model: 200275
- MPN: 200275
- Country of Manufacture: United States
