Compatibility? 80588 Control board for King KP130, 5502M, 5500M, 5500, KP 130, 5510, KP60, 5500XLT pellet stove models. 80778 control board for US Stove 5500M, 5500, 5520, Golden Eagle 5520, 5502M, 5510 pellet stove models. Compatibility? Control board for Ashley 5500, AP60, 5500M, 5500XL, 5500XLT pellet stove models. Control board for USSC 5500M, 5510, 5500 pellet stove models. Control board for Vogelzang VG130 pellet stove. Get Your Stove Work Like New Again The us stove 80778 circuit board assembly is the brains of your pellet stove. Without it, the pellet stove will not work. This us stove control board fit exact and is perfect. After replacing with a new us stove pellet stove control board, your stove will be back up and running. Perfect Replacement Part Fits perfectly, works great. Made very well built. Made to last a long time. Please Note If your stove has an igniter board and a main control board, this new board replaces both. It has been updated and now has better technology. If you are converting from the 2 board set up you will need a new wiring harness. Replacement PCB control board / circuit board assembly for King, US Stove, Ashely, USSC, and Vogelzang pellet stoves. Replacement for part numbers 80778, 80558 and 80487. This is the replacement for the Discontinued 80558 controller. There may be some slight differences with the wiring connectors. Fits the following models. Fits King Pellet Stoves. Fits US Stove Pellet Stoves. Fits Ashley Pellet Stoves. Fits Vogelzang Pellet Stoves.
The Quadra-Fire 4-speed Control Box/Circuit Board #7000-206 is a genuine OEM product. This controller is used in the Quadra-Fire original Mt. Vernon (not AE or E2 version) pellet stove. The control box is clear and has dimensions of 2 inches in height, 4.5 inches in depth, and 5.5 inches in width. There are 3 leds in the box. The blue LED flashes the program number on the selector switch. The green and red LEDs indicate high and low temperatures in the stove. A rotary selector switch is located in a hole on the rear of the controller. Carefully use a small screwdriver to point the arrow at the corresponding number for you stove, as followed. #0 – Test mode. Vernon (+10% feed rate). Vernon (-10% feed rate). Some switches may vary. Switch setting #6 may equal program #1 Mt. Count the number of flashes the blue led makes when the stove is powered up to check the program number. You should see 1 blink every 10 seconds for 30 seconds. This controller is brand-new and tested/calibrated on a custom pellet stove simulator. Pantrol, located in Spokane, Washington, is the original designer and has manufactured this controller since 2004. Pantrol is not liable for any incidental or consequential damages arising from the use or inability to use the product. Always use a surge protector on your pellet stove. Always unplug the pellet stove when installing a new controller and make sure the edge is properly seated in the connector before plugging it in. Pellet stove controllers are not returnable. This controller is not for the Mt. Vernon AE or Mt. Please follow the included instructions. What is Not Covered. Damage caused by misuse, abuse, neglect, or improper care. Normal wear and tear, including scratches, dents, or cosmetic damage. Damage resulting from accidents, natural disasters, or unauthorized repairs. Any product that has been modified from its original condition. A detailed description of the issue. Photos or videos if applicable. Upon receiving the claim, we will review the information and provide instructions for returning the product (if necessary).
