2 PACK ENGLANDER PELLET STOVE AUGER MOTORS – 1 RPM – PU-047040. BRAND NEW — ALMOST SILENT. These motors are extremely quiet, to me they are almost silent. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. It is a direct replacement, a perfect fit and the hook-up very easy. Recently the market is being flooded with motors made in China and Korea. You will see they lack the Underwriters. Please remember Englander stoves use a 1 rpm motor and the shaft turns counter-clockwise when facing the output shaft. Upper and lower motors are the same but the lower one runs continuously. A partial list of stoves and cross over part numbers is at the bottom. We include ENGLANDER specific instructions with the motor. Installation is easy; only one set screw couples the motor to the auger. In most cases the motor is not attached to the stove frame. Included are two spade wire connectors in case you need them, but the 6 spade leads from the motor really make’s hooking up easy. It doesn’t matter which wire goes to which connection as long as they are connected. This motor i s the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. The item “2 PACK PU-047040 ENGLANDER PELLET STOVE AUGER MOTORS PU047040 VERY QUIET” is in sale since Tuesday, November 24, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “fordham52″ and is located in Kansas City, Missouri. This item can be shipped to United States, Canada.
- Brand: Does not apply
- Model: Does not apply
- MPN: PU-047040
- Country of Manufacture: United States
HARMAN PELLET / COAL STOVE AUGER MOTOR – 4 RPM – 3-20-60906 NEW STOCK. We sell parts for many types of pellet stoves here in. We only list motors we have in-stock. Time to take care of upgrades and repairs before. Winter is here again. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. Guess where many of the other motors are made? Stoves use a 4 rpm motor and this model the shaft turns clockwise when facing the output shaft. This motors is the most common but. HARMAN produces stoves requiring different RPMs and rotation direction. Please pay close attention to the models and serial number ranges at the bottom of the page but if you have a different model, please drop us a line. We carry most all. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw couples the motor to the auger. Some mounting hardware has to be used from the old motor. A new cooling fan is included and it is recommended that it be used. Included are two spade wire connectors in case you need them. Most stoves have ¼ connectors to attach the power to the motors. Some stoves built prior to 2000 have smaller connectors so a set of replacement connectors are included. Just crimp the connector on the wire if necessary. It doesn’t matter which wire goes to which connection as long as they are connected. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. Accentra Insert (Pre serial # 008400000) – NOT FREE STANDING. Pellet Pro 38 Plus (P38+). Pellet Pro II (PP2). PC45 (may have two motors). P68 (Pre serial # 008280309). The item “NEW HARMAN PELLET / COAL STOVE AUGER MOTOR 4 RPM 3-20-60906 VERY QUIET m” is in sale since Saturday, March 01, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Brand: Does not apply
- MPN: Does not apply
Vintage CREATIVE PLAYTHINGS Wood Kitchen stove sink cabinets. Many of our customers have used MAAS (even tho it often takes a bit longer than the other carriers). Area for many years. This vintage CREATIVE PLAYTHINGS wood kitchen is ready for many more years of creative and imaginative fun. It is 29 wide, 25 high at the back, 23 ¼ tall at the front, and has a maximum depth of 13 5/8. The cooking surface has two painted red burners and a blue laminate inset rectangular surface. There are three black plastic knobs. The sink has a metal faucet (that can swivel from side to side) with black handles for hot and cold water. There was white Duck Easy Liner contact paper on all the innere shelves, but we have removed it since it was put on (for extra protection) in recent years. You can recover them if desired — to again give them a clean white fresh look (and cover up evidence of use and wear). The body of the kitchen is wood. Masonite type panels were used for the shelves and the backing. We have not ever done anything to the wood, but you could go over it with lemon oil. You can use the oil on four zero — 0000 — steel wool to remove surface grime / marks / paint splatters. There is evidence of age and use. On the left side some of the top layer of the wood laminate needs to be glued down — and a small section is missing. At the back bottom corner of the right side, there is some damage at the corner. We have mentioned these small areas (on the sides) so that you can be sure to find them in the photos to see that they are minor. The manufacturers logo and label are on the front at the lower left. We had thought that it was by COMMUNITY PLAYTHINGS, but when we photographed it, we realized that it was made by CREATIVE PLAYTHINGS. Both American firms have made durable wood products for children for many years. All items we sell are from a pet free and smoke free environment unless prior owner history is noted above. We are incredibly scrupulous with our descriptions of an items condition so that you can make an informed purchasing decision. Note on measurements : All measurements are approximate. The item “Vintage Creative Playthings Wood Kitchen stove sink cabinets Very Cute” is in sale since Tuesday, May 12, 2015. This item is in the category “Toys & Hobbies\Preschool Toys & Pretend Play\Kitchens”. The seller is “adamsbyrdfineartsandantqs” and is located in Alexandria, Virginia. This item can’t be shipped, the buyer must pick up the item.
- Brand: Creative Playthings
- Material: Wood (with metal, plastic, etc.)
- Year: unknown — 1960s ??
- Country/Region of Manufacture: United States
BRECKWELL PELLET STOVE AUGER MOTOR – 1 RPM. Breckwell Part Number C-E 017M or 80642 – NEW STOCK. We sell parts for many types of pellet stoves here in. We are starting to get ready for Winter here in PA. Time to take care of upgrades and repairs. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. You will also need a wiring harness to attach the auger motor to the control board. We include this harness, other sellers leave it to you to make it up. Please remember most BRECKWELL. Stoves use a 1 rpm motor and the shaft turns clockwise when facing the output shaft. The motor shaft be pinned to the auger – there is a hole in the shaft to acomodate this. Other models (after 2002) use a locking collar which require a beveled edge, this motor works with all these stoves. Partial list of stoves and cross over part numbers is at the bottom. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw or cotter pin couples the motor to the auger. In most cases the motor is not attached to the stove frame. Harness included connects the terminals on the rear of the motor to the control power strip o n the back of the stove. On the motor , it doesn’t matter which wire goes to which connection as long as they are connected. On the power strip the harness has one male and one female connection to mate up the proper terminal. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are thermal welded to the terminals, not just crimped. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrant y and shorten the life of the motor. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. All Breckwell stoves manufactured after 2002. The control panel has the heat setting – High – Med – Low. The control panel has the heat setting – Low – B – C – High. P23 models serial # 7166 and higher. P23 Insert serial # 2243. P24 – P24 Insert Serial# 53664 and higher. P2000 serial # 11780 and higher. P2000 Insert # 22208 and higher. P2700 serial # 8445 and higher. The item “BRECKWELL PELLET STOVE AUGER MOTOR 1 RPM C-E 017M 80642 VERY QUIET g” is in sale since Thursday, March 06, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- MPN: Does not apply
- Model: Does not apply
BRECKWELL PELLET STOVE AUGER MOTOR – 1 RPM. Breckwell Part Number C-E 017M or 80642 – NEW STOCK. We sell parts for many types of pellet stoves here in. We are starting to get ready for Winter here in PA. Time to take care of upgrades and repairs. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. You will also need a wiring harness to attach the auger motor to the control board. We include this harness, other sellers leave it to you to make it up. Please remember most BRECKWELL. Stoves use a 1 rpm motor and the shaft turns clockwise when facing the output shaft. The motor shaft be pinned to the auger – there is a hole in the shaft to acomodate this. Other models (after 2002) use a locking collar which require a beveled edge, this motor works with all these stoves. Partial list of stoves and cross over part numbers is at the bottom. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw or cotter pin couples the motor to the auger. In most cases the motor is not attached to the stove frame. Harness included connects the terminals on the rear of the motor to the control power strip o n the back of the stove. On the motor , it doesn’t matter which wire goes to which connection as long as they are connected. On the power strip the harness has one male and one female connection to mate up the proper terminal. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are thermal welded to the terminals, not just crimped. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrant y and shorten the life of the motor. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. All Breckwell stoves manufactured after 2002. The control panel has the heat setting – High – Med – Low. The control panel has the heat setting – Low – B – C – High. P23 models serial # 7166 and higher. P23 Insert serial # 2243. P24 – P24 Insert Serial# 53664 and higher. P2000 serial # 11780 and higher. P2000 Insert # 22208 and higher. P2700 serial # 8445 and higher. The item “BRECKWELL PELLET STOVE AUGER MOTOR 1 RPM C-E 017M 80642 VERY QUIET g” is in sale since Thursday, March 06, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- MPN: Does not apply
- Model: Does not apply
