BETTER than Scratch and Dent!! (Because these don’t have dents or scratches, just low , low prices). In over 4 years we have never had a SALE as good as this! The last time we had any was 4 years ago and we have limited supplies of these USED furnaces, just the way we have made them until a couple of months ago. All furnaces have been completely factory refurbished; inside out, top to bottom! ALL refurbished LOOK LIKE NEW and all furnaces have 100% new tin and insulation! New grates, both new doors, door seals on firebox and ash receptacle doors! A built-in domestic hot water heat exchanger! All have a thermostat and chimney cap! All have TWO sets of ports to heat an additional building. Pumps supplied at cost according to your needs/distance/elevation change. 75 CFM forced-air induction air blower included. And auto damper, which saves a lot of wood! Please allow 2 weeks for completion because we completely refurbish each furnace for you, the customer; custom rebuilt with your choice of available colors. All furnaces have been updated with the new hot water coil cover which puts the water level at the very top of the water jacket! No separate domestic Hot Water plate or side-arm heat exchanger is needed Nor is a tempering or mixing valve needed, to avoid scalding water!! You also get a thermostat to control the water temperature in the furnace, automatically – along with a 75 CFM induction blower fan, in the back, to feed air to the bottom of the fire, like a blacksmith’s forge. The automatic damper is a simple solenoid activated damper; that opens and closes the door on the side of the fan, so instead of it being a manual adjustment, it will open and close that door 100%, which will stop the air from drafting into the firebox when the fan turns off. According to our customers, this saves a tremendous amount of wood and gives you better temperature control in the furnace. There aren’t any circuit boards to fail or fancy electronics to give any problem! No proprietary parts; you DON’T have to come to us to get any replacement part. Our boilers are so strong that we can hang and move them with the chimney because it is 1/4″ thick steel welded into our super strong ROUND 3/8″ THICK firebox. The chimney drops down into the firebox trapping the heat in the firebox to heat the water and not the outside air – but more importantly, it traps the gases from the wood in the huge secondary burn chamber that we created in the top of the firebox. As soon as there is a flame, all of the gases get burnt, extracting that much more energy from your wood that would otherwise be wasted! We custom refurbish every furnace for you , so when you order, you can. C o l o r s , while in stock; limited availability. Roof, sides, corners and roof trim and even the front can be a different color with over. You get NEW GRATES, NEW METAL where there is ANY possibility of a leak; we take off the whole sheet and do a thorough inspection, in and out and weld new metal back in. We have been in business for 44 years, in the same factory location and we are a family run business. We are a brick and mortar business in Salem, Arkansas and we are here to stay. We stand behind the quality of our furnaces 100%. We believe that we can give you a quality furnace and save you thousands of dollars on these refurbished furnaces, at the same time. The item “Outdoor Wood Furnace Boiler Stove 100% refurbished with WARRANTY! 4.000 sq. Ft” is in sale since Wednesday, January 03, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Other Home Heating & Cooling”. The seller is “aware” and is located in Salem, Arkansas. This item can be shipped to United States.
- Brand: Hyprotherm
- Model: 165
- Type: Whole House Wood Furnace
- Finish: Metal
- Country/Region of Manufacture: United States
Whitfield Quest Plus Pellet Stove. This Whitfield Quest freestanding pellet stove model was manufactured in 1993. It was taken in on trade and has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has been cleaned but not re-painted. Contemporary styling with bay view window. Touch Pad Control Panel – 5 heat and 5 blower settings for ultimate comfort. High Efficiency Output – Up to 30,000 BTU will heat up to 1500 sq ft depending on home efficiency, climate and desired temperature. Pull out pedestal ash pan – depending on fuel type and operation, ash tray will hold weeks to months before dumping is needed. Ability to burn standard or premium wood pellets. UL Approved for Mobile Homes. High End Motors and Fans. One of the most dependable stoves ever made. Worry free operation and maintenance. Superior air-wash system for excellent fire viewing and extended cleanliness. Over 25 years of trusted value and commitment to our customers. The item “Whitfield Quest Plus FS Pellet Stove, 30,000 BTU Used / Refurbished SALE” is in sale since Thursday, June 29, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 30272-U
- Brand: Whitfield
- Model: Quest Plus FS
- Country/Region of Manufacture: United States
- Heat Output: 30000
Quadra-Fire 1200i Fireplace Insert Pellet Stove – Used/ Refurbished. The Classic Bay 1200 Fireplace Insert is a top of the line pellet stove. Ball bearing motors and blowers for whisper quiet operation and peace of mind. Fully automatic temperature control keeps your comfort level precisely where you desire. The 1200i has the ability of burning a mixture of dry shell corn in addition to any grade of pellets (50/50 blend recommended). Bay window allows an excellent view of the fire and minimal dimensions allow installation into most fireplace openings. Zero Clearance Kit and Outside Air Kit are available. This Quadra Fire 1200i Fireplace Insert Pellet Refurbished Stove was manufactured in the USA in 2008. This unit was brought in on trade, it has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in correct working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has now been fully re-painted and in excellent working condition. Heating Area – 500 – 2,500 sq. Based on climate, insulation, windows/doors, ceiling height, and desired temperature. Heat Output – 42,000 BTU. Heat Output – 14,000 BTU. Automatic Start/Ignition – Yes. Hopper Capacity – 60 – 75 lbs. (Depending on hopper height set for installation). Fuel Type Premium pellets preferred, but will burn standard. Approved for 50% corn/pellet mixture. Thermostat Compatible – Yes (Standard Wall Thermostat Included). Height – 25.5″ Width – 29.25″ Depth – 25 in. Extension onto Hearth: 11 in. Height – 19.5″ – 22″ depending on the hopper being up or down. Width – Front: 29.25″ Tapers to rear measurement of 22″. Depth – 13 total depth into fireplace. Weight – 343 lbs. Flue Vent Size – 3 in. A four inch venting system is recommended. Exhaust Temperature Sensor – Yes. Low Draft Shutdown – Yes. Construction Type – Steel. This unit comes with the Gold door as seen in the pictures. This unit comes with a Surround/Shroud of your choice. Either 30″x40″ or 33″x50″. Over 25 years of trusted value and commitment to our customers. The item “QuadraFire Classic Bay 1200i Fireplace Insert Pellet Stove Refurbished SALE” is in sale since Monday, August 28, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 007C2007066
- Heat Output: 42000
- Brand: QuadraFire
- Model: 1200i
- Country/Region of Manufacture: United States
BETTER than Scratch and Dent!! (Because these don’t have dents or scratches, just low , low prices). In over 4 years we have never had a sale as good as this! The last time we had any was 4 years ago and we have limited supplies of these USED furnaces, just the way we have made them until a couple of months ago. All furnaces have been completely factory refurbished! ALL refurbished LOOK LIKE NEW and all furnaces have 100% new tin and insulation! New grates, new door seals; on firebox and ash receptacle doors! Built-in domestic hot water heat exchanger! All have a thermostat and chimney cap! All have TWO sets of ports to heat an additional building. Pumps supplied at cost according to your needs/distance/elevation change. 75 CFM forced-air induction air blower included, and auto damper, which saves a lot of wood! Please allow 2 weeks for completion because we completely refurbish each furnace for you, the customer; custom rebuilt with your choice of available colors. All furnaces have been updated with the new hot water coil cover which puts the water level at the very top of the water jacket! No separate domestic Hot Water plate or side-arm heat exchanger is needed Nor is a tempering or mixing valve needed, to avoid scalding water!! You also get a thermostat to control the water temperature in the furnace, automatically – along with a 75 CFM induction blower fan, in the back, to feed air to the bottom of the fire, like a blacksmith’s forge. The automatic damper is a simple solenoid activated damper; that opens and closes the door on the side of the fan, so instead of it being a manual adjustment, it will open and close that door 100%, which will stop the air from drafting into the firebox when the fan turns off. According to our customers, this saves a tremendous amount of wood and gives you better temperature control in the furnace. There aren’t any circuit boards to fail or fancy electronics to give any problem! No proprietary parts; you DON’T have to come to us to get any replacement part. Our boilers are so strong that we can hang and move them from the chimney because it is 1/4″ thick steel welded into our super strong ROUND 3/8″ THICK firebox. The chimney drops down into the firebox trapping the heat in the firebox to heat the water and not the outside air – but more importantly, it traps the gases from the wood in the huge secondary burn chamber that we created in the top of the firebox. As soon as there is a flame, all of the gases bet burnt, extracting that much more energy from your wood that would otherwise be wasted! We custom refurbish every furnace for you , so when you order, you can specify. Choice of 20 great. C o l o r s , while in stock; limited availability. Roof, sides, corners and roof trim and even the front can be a different color with over. We have been in business for 44 years, in the same factory location and we are a family run business. We are a brick and mortar business in Salem, Arkansas – and we are here to stay. We stand behind the quality of our furnaces 100%. We believe that we can give you a quality furnace and save you thousands of dollars on these refurbished furnaces, at the same time. The item “Outdoor Wood Furnace Boiler Stove 100% refurbished with WARRANTY! 4.000 sq. Ft” is in sale since Wednesday, November 01, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Other Home Heating & Cooling”. The seller is “aware” and is located in Salem, Arkansas. This item can be shipped to United States.
- Brand: Hyprotherm
- Model: 165
- Type: Whole House Wood Furnace
- Finish: Metal
- Country/Region of Manufacture: United States
Whitfield Advantage WP2 Insert Pellet Stove. This Whitfield Advantage WP2 pellet stove fireplace insert model was manufactured in 1994. It was taken in on trade and has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has been cleaned but not re-painted. Contemporary styling with bay view window. NOTE – No Zero Clearance Can only be installed into an existing masonry fireplace or fireplace with an existing metal box. 13,000 – 40,000 BTU output- designed to comfortably heat small rooms to large areas. 500 – 2000 Sq. Heating Capacity based on fuel type, home efficiency, and climate. Ability to burn standard or premium wood pellets. High End Motors and Fans. Superior air-wash system for excellent fire viewing and extended cleanliness. Surround/Shroud as shown included with the unit. Surround/Shroud 40 ½ w X 28 height. Stove Into fireplace 20 w X 20 H x 14 ½ d. Onto Hearth 19 ½ w x 21 ½ h x 5 ½ d. Over 25 years of trusted value and commitment to our customers. The item “Whitfield Advantage 2T, IIT, WP2 Pellet Stove Insert Used / Refurbished SALE” is in sale since Wednesday, September 20, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 88847-U
- Heat Output: 40000
- Brand: Whitfield
- Model: WP2 Advantage IIT Insert
- Country/Region of Manufacture: United States
Incoming search terms:
Whitfield Advantage WP2 Insert Pellet Stove. This Whitfield Advantage WP2 pellet stove fireplace insert model was manufactured in 1994. It was taken in on trade and has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has been cleaned but not re-painted. Contemporary styling with bay view window. NOTE – No Zero Clearance Can only be installed into an existing masonry fireplace or fireplace with an existing metal box. 13,000 – 40,000 BTU output- designed to comfortably heat small rooms to large areas. 500 – 2000 Sq. Heating Capacity based on fuel type, home efficiency, and climate. Ability to burn standard or premium wood pellets. High End Motors and Fans. Superior air-wash system for excellent fire viewing and extended cleanliness. Surround/Shroud as shown included with the unit. Surround/Shroud 40 ½ w X 28 height. Stove Into fireplace 20 w X 20 H x 14 ½ d. Onto Hearth 19 ½ w x 21 ½ h x 5 ½ d. Over 25 years of trusted value and commitment to our customers. The item “Whitfield Advantage 2T, IIT, WP2 Pellet Stove Insert Used / Refurbished SALE” is in sale since Tuesday, September 19, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 88593-U
- Heat Output: 40000
- Brand: Whitfield
- Model: WP2 Advantage
- Country/Region of Manufacture: United States
