QUADRA-FIRE 800 NOVA & QUADRA-FIRE 1000 PELLET STOVE AUGER MOTOR. We sell parts for many types of pellet stoves here in. We only list motors we have in-stock. It has been a cool summer in PA. I do not know what that means for the winter but I think we should. Take care of upgrades and repairs right away. This motor is extremely quiet, to me it is almost silent. These Motors are rated for CONTINUOUS duty. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. Please remember QUADRA-FIRE 800 & QUADRA-FIRE 1000 PELLET stoves use a 1.3 rpm motor and the shaft turns counter-clockwise when facing the output shaft. This motor only fits these two models. The difference seems small but with a 1 RPM motor you are reducing the rotation by 30%. That means when the stove is set on minimum 30% less pellets will be sent to the fire and your stove may shut down. On the other end if you set the stove on high it will not produce as much heat as before because the auger now turning slower what the stove was. If in other ads, you see the power connections are close to the motor body it means the motor had a clockwise rotation when manufactured and someone has reversed the rotation by flipping it over. This shortens the life of the motor as the motor has to be precision aligned and the screws torque to specific amounts. The connectors should be away from the motor body as shown in the pictures. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw couples the motor to the auger. In most cases the motor is not attached to the stove frame. Included are two spade wire connectors in case you need them. Most stoves have ΒΌ connectors to attach the power to the motors. Some stoves built prior to 2000 have smaller connectors so a set of replacement connectors are included. Just crimp the connector on the wire if necessary. It doesn’t matter which wire goes to which connection as long as they are connected. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are soldered to the terminals, not just crimped. The output shaft is hardened steel to prevent wear. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Counter Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrantee and shorten the life of the motor. If you really needed. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. The item “1.3 RPM QUADRA FIRE 800 NOVA 1000 PELLET STOVE AUGER MOTOR 812-0170 j” is in sale since Thursday, December 19, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- Model: Does not apply
- MPN: Does not apply
Quadra-Fire Santa Fe Fireplace Insert Pellet Stove – Used / Refurbished. This Quadra-Fire Santa Fe Fireplace Insert model has a manufacture date of 2008. It was taken in on trade and has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in correct working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has not been re-painted; there are areas of wear as shown in the pictures. Approx 4 cans would be needed to re-paint the entire unit. This unit is in excellent working condition. The Quadra-Fire 2008 was manufactured in the USA. This is one of the easiest to maintain and highest efficiency fireplace insert pellet stoves on the market. The Santa Fe is a sleek, contemporary and eco-friendly heating option. But dont let its size fool youthis compact unit packs some heating punch. Expect clean, durable and long-lasting performance from the Santa Fe Fireplace Insert. 38,700 BTUs heats 700 to 1,800 square feet, based on climate and home efficiency. EPA certified, with low emission levels of 1.8 grams per hour. Patented feed system for jam-free operation. Heating Capacity: 700 to 1,800 square foot Maximum BTU Output: 37,800 BTU (4.5 lbs per hour) Minimum BTU Output: 11,600 BTU (1.8 lbs per hour) Blower: 150 CFM Hopper Capacity: 4 5 lbs. Vent Pipe Diameter: 3″ Pellet vent Width: 21 1/2″ Front Height: 25 3/8″ Rear Height: 23″ Depth Into Fireplace: 12 3/4″ Depth Onto Hearth: 8 5/8″ Approximate Weight: 225 lbs Electrical: Blower motor AC 120 Volts 60 H. Square-feet heating capacities are approximations only. Actual performance may vary depending upon home design and insulation, ceiling heights, climate, condition and type of wood used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated. Over 25 years of trusted value and commitment to our customers. The item “Quadra Fire Santa Fe Fireplace Insert Pellet Stove Used / Refurbished” is in sale since Tuesday, April 25, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 00700800972-U
- Heat Output: 37800
- Brand: Quadra Fire
- Model: Santa Fe Insert
- Country/Region of Manufacture: United States
Quadra Fire Santa Fe Fireplace Insert Pellet Stove – Used / Refurbished. This Quadra Fire Santa Fe Fireplace Insert model has a manufacture date of 2010. It was taken in on trade and has gone through a full double pre-burn and 45 point inspection checklist by our certified pellet stove technicians. Everything is in correct working condition and the unit comes with a. On electrical components Surge protector is included to protect the circuit board; we are not responsible for power surges, lightning strikes or physical damage to the circuit board. This unit has not been re-painted; there are areas of wear as shown in the pictures. Approx 4 cans would be needed to re-paint the entire unit. This unit is in excellent working condition. The Quadra Fire 2010 was manufactured in the USA. This is one of the easiest to maintain and highest efficiency fireplace insert pellet stoves on the market. The Santa Fe is a sleek, contemporary and eco-friendly heating option. But dont let its size fool youthis compact unit packs some heating punch. Expect clean, durable and long-lasting performance from this advanced insert. 38,700 BTUs heats 700 to 1,800 square feet, based on climate and home efficiency. EPA certified, with low emission levels of 1.8 grams per hour. Patented feed system for jam-free operation. Heating Capacity: 700 to 1,800 square foot Maximum BTU Output: 37,800 BTU (4.5 lbs per hour) Minimum BTU Output: 11,600 BTU (1.8 lbs per hour) Blower: 150 CFM Hopper Capacity: 4 5 lbs. Vent Pipe Diameter: 3″ Pellet vent Width: 21 1/2″ Front Height: 25 3/8″ Rear Height: 23″ Depth Into Fireplace: 12 3/4″ Depth Onto Hearth: 8 5/8″ Approximate Weight: 225 lbs Electrical: Blower motor AC 120 Volts 60 H. Square-feet heating capacities are approximations only. Actual performance may vary depending upon home design and insulation, ceiling heights, climate, condition and type of wood used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated. Over 25 years of trusted value and commitment to our customers. The item “Quadra Fire Santa Fe Fireplace Insert Pellet Stove Used / Refurbished” is in sale since Tuesday, April 04, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Heating Stoves”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped to United States.
- Type: Pellet-Burning Stove
- Features: Blower/Fan
- MPN: 701500878
- Heat Output: 37800
- Brand: Quadra Fire
- Model: Santa Fe Insert
- Country/Region of Manufacture: United States