Johnson Rod Lift Kits are made from stainless steel and are stronger than the original factory equipment which is made from plastic. However, because of their design, they provide key lateral flexibility like the original part to protect your height sensor equipment. Johnson Rods are not adjustable and are therefore very reliable like the original equipment part. The key to a good modified height sensor rod is for it to be accurate in length and to fit tight like the original. Johnson Rods are designed for accuracy and dependability. Trail tested and tough, Johnson Rods will increase your off road opportunities and limit the potential for damage with added clearance and the ability to install larger tires. Don’t get fooled and be taken advantage of by cheap lift rod copies made of plastic or thin twisted metal. Many customers come to me after making this mistake, These cheaper made products will bend and break easily. They have very thin rubber grommets and don’t hold tight causing problems with the system. Johnson Rods are solid and made with thick stainless steel that will not bend, rust or be affected by harsh weather. The Johnson Rod grommets are much wider like the original part which insures you have a good fit. This is why Land Rover dealers order and use Johnson Rods. This kit provides 2 inches of lift for MY 2005-12 full size L322 Range Rover. Send us a picture of your vehicle #johnsonrods on Instagram. The item “Range Rover L322 Lift Kit fit 2005-12″ is in sale since Wednesday, January 16, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “johnsonrodslr3″ and is located in La Quinta, California. This item can be shipped worldwide.
From the factory, the Range Rover HSE comes equipped with an air ride suspension. This system utilizes four sensors (two in the front and two in the rear) to control the ride height of the vehicle. This is accomplished by the use of a small linkage which connects the sensor to the suspension. As the vehicle is raised or lowered, the linkage moves the sensor up or down sending a signal to the computer telling it how high the vehicle is. By replacing the fixed linkage with one of our adjustable designs, you can change the output of the sensor making the computer believe that the vehicle is higher than it actually is. The computer will then respond by lowering the vehicle. The simplicity of our setup is that it maintains all the functionality of the factory system while allowing individual height adjustment at each corner. Our links are manufactured utilizing the factory Range Rover rubber end link combined with our fully adjustable corrosion resistant heim joint. This makes swapping links very easy. Since our links don’t require any permanent modifications to the vehicle, the installation is fully reversible, allowing the owner to reinstall the factory links at any time. Made in the U. Detailed photo instructions included. We constantly testing and improving the quality of our product. General FAQ regarding links. Cheaper than an electronic module and requires no cutting of the wiring harness. Install time around one hour. Will not alter the ride quality, unless lowered to the extreme limit of the system. Lowering of any vehicle requires an alignment. Kit requires only simple tools to install. Are emailed to all buyers automatically trough. OTHER SELLERS WON’T PAY FOR THAT. YOU MOUNT THEM YOU OWN THEM. Some vehicle’s may require additional modifications. We reserve the right to refuse service to anyone. All claims must be reported within 24 hours of receipt of merchandise. The item “2003-12 LAND ROVER RANGE ROVER HSE ADJUSTABLE LOWERING LINKS SUSPENSION KIT L322″ is in sale since Friday, October 16, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “aptires” and is located in Tampa, Florida. This item can be shipped worldwide.
