TOP LOADER Log Burner Outdoor Wood Burner Boiler Furnace Stove Outside 13,500 sf

WE now have the NEW Water. WE now have the NEW Water-less Lid Models; now stronger, sleeker and better insulated than before. The new models are shown in the gallery (upper left of the ad) in various sizes, the cream colored models longer than the 6 foot model of this ad. If you don’t see what you want listed, (like a water-filled lid or longer, wider or taller model) just write to me and I will list one for YOU! Look at the new photos; the new water-less lid models with one in production, before being tinned. For commercial purposes, a shop, garage, greenhouse, heat a pool, etc. In MANY states, this is considered a commercial boiler and because the BTU output is so high, it falls out of the scope of residential units; therefore 100% LEGAL. FOR A RESIDENCE are now. In ALL 50 STATES! (A new FEDERAL EPA LAW kicked-in nation-wide on Jan 1, 2016). That means folks who have a shop (body, wood, auto, etc) or commercial business, greenhouse, barn, pool, etc. For you folks in Canada, the U. Spain, Europe and other countries overseas, Wood Boilers are still available! People simply hate how hard the EPA boilers are to start and that it’s a full-time job to keep them running because. The wood HAS to be dried, under cover, for a minimum of two years! 500 (1/2) inch thick! It will heat up to. Based on wood capacity. 6L x 3W x 3H FIRE BOX. NOW with a BIGGER 26.5″ x 26.5″door, with a 2 foot by 2 foot opening! Load with your dump truck, back hoe, fork lift or front-end loader! Or Load from the side safely by hand in case of hydraulic or battery failure or repair! Ashes are cleaned out through the smaller door, below the side firebox door. Large Top Loading Furnace! Load it with even MORE logs, EASIER, for even longer burn times in your log burner! Don’t load your log burner furnace multiple times per day as you do with traditional wood stoves. All types of fuel can be used to create hot water (heat) such as stumps, wood chips, brush, wood by-product, pelletized wood and of course, almost 6 foot long logs! This product is manufactured in Arkansas but made for the Great White North. 24″ x 24″ Side Loading Door shown with ash clean-out door below it. FEATURES: 1/2 THICK Firebox. STRONGER Fillit welds; Fully water jacketed, RANCO Digital thermostat STANDARD with temperature readout Standard (Armstrong Astro 30) pump to circulate the water to your shop/home, in addition to the one that circulates water from the bottom tank to the lid , (on water filled lids) to prevent hot spots. BTU: over 469,490 BTU in reserve, available to heat your home or building even if the fire goes out (due to no wood). Load with almost 6 foot logs ; no cutting or splitting! 6 foot long firebox x 3 feet wide x 3 feet tall. Compared to a max of 32 cu. Ft with our 340 model. Based on firebox (wood) capacity, it will heat 13,500 sq. In a PA type climate, loading it just twice a day with a good hardwood – like oak or maple; assuming the building is well-insulated. You could heat a 6,250 sq. Ft building, loading it just once a day. You could heat a 3,100 sq. Ft building loading it once every two days. There is no negative to getting a bigger furnace because it is not like purchasing an air conditioner where if you get one too big, it becomes inefficient. It is simply like getting a bigger fuel tank so that it will hold more fuel and you will need to fill it less often. Water-filled Lid Models come with two pumps ; Armstrong Astro 30. One to circulate the water from the tank in the bottom to the lid, so that there aren’t any hot spots and one to circulate the water to the building (Only on models with water in the lid) (may need to be upgraded, depending on application). 12V Car or Deep Cycle Battery NOW included. Can be charged with simple solar panel or simple trickle/float charger. Side door for safer hand loading too AND ash clean-out! Can be made as a gasification unit just like all of our other furnaces. Our most popular from day one: Model 633 (formerly called the 450) 6Lx 3W x3H FIRE BOX. Water Capacity 419 (12 water jacket a around), 504 gallons with the optional water-filled lid. 54 cubic feet (68% Bigger than our biggest Front Loader – the 400 model). In a PA type climate, loading it just twice a day with a good hardwood – like oak or maple, assuming the building is well-insulated. LEGEND for photo of rear, (connections). Brass dry well, with Ranco sensor bulb. Constant run transfer pump, supply line moving water from lower section to top lid. 1 port for supply D. 1 port for supply E. 1 port for supply F. Capped 2 port, can be split making two 1 supply ports. 1 return from B. Ranco ETC, temperature control unit for Q. Plug into switched receptacle N. To cut power to M. To shut off blowers Q, and Q when refueling furnace. The Ranco will power back up with its previous settings when O is turned back on. 1 connection to top lid from B ONLY with optional water filled lid. 115 volt switch powered by P. Turns power on or off to N. Connect 30amp 115volt power supply to lower half of this receptacle. Two 75cfm Dayton combustion blowers, controlled by M. 12volt hydraulic pump and reservoir S. 12 volt battery, power supply for R. May be trickle charged by 115 volt AC charger or, solar battery charger. All supply ports are located to the left of this baffle. This baffle forces cooler water returning to the furnace to flow counter clockwise around the entire fire box. This reheats the water before it is drawn out of one of the supply ports B G. All supply need be connected to the left of this baffle. Write to me and I will list one for you. We custom build every furnace for you , so when you order, you can specify YOUR choice of 17 great c o l o r s to best suit your surroundings! WE WILL CUSTOM BUILD ANYTHING THAT YOU WANT BECAUSE ALL OF THESE ARE BUILT TO ORDER! We just did one 14 feet long!! The WORLD’s BIGGEST TOP LOADER! Automatic, solenoid activated forced-air induction fan/blower SHOWN HERE. (No electronics) The blower in the back is a great aid in getting a fire started and kept roaring – JUST LIKE A BLACKSMITH’S FORGE! It also recovers the water temperature much quicker and burns the wood up more completely because oxygen is being fed to the bottom of the flame – like a blacksmith feeds his fire! View of port where the air blows in underneath (below)! Extra wide rope seal; wraps around the raised lip on the base, to seal the lid. Note the plate of steel, that is raided off from the lid, with a nice air insulating air gap. WE have a 4 foot high version of the one on sale here. We had a lot of recommendations to make this boiler taller by one foot so that customers could get bigger logs in the boiler. Heats up to 18,063 sq. With the 12 water jacket all around. Logs can cost up to 2/3 less than split wood and burns more efficiently due to size. No need to cut and split wood, just put whole logs in and close the lid. Heat very large buildings. Such as: Greenhouses, Barns, Drive sheds, Garages, Shops, commercial buildings, etc. Load your Log Burner with machinery such as dump trucks, tractors, back hoes and fork lifts. On-Site and 100% paid! Who else offers that, who has been around 47 years? A lot of warranties only cover parts (not even labor)! A gentleman called me and told me his 2-year old C_____l B____r was leaking! All major problems such as leaks 10 years coverage on the water jacket Building Quality Wood & Coal Furnaces for 47 Years! Over 8,000 Different Color Combinations! HyProTherm Furnace is a privately held company and was established in 1972. A Heating and Air company preceded it and dates back to 1950. Billy and his Dad, Gerald, were in the heating and air business for decades. They began to develop their first prototype for their own home, in the 60’s. Gerald knew there had to be a better way than to pay for oil, even though it was cheap back then. His main concern however, was to get rid of the smoke and ashes in the house. It was obvious it could cause serious health problems. Besides the soot all over the place was a chore to clean. Having the wood outside already, made the plan simple. Put the wood stove outside! Stick something like a heater core from a car in the plenum and it would radiate heat – and the hot water could be pumped from the outside. He developed a model for himself and continued to improve on it over the years. We were indeed the first! The last revision was made in 2009 and the furnace remains essentially unchanged, except for cosmetics, today. Now Gerald’s son, Billy heads up the business. We have been in business for 46 years and we are a family run business. We are a brick and mortar business in Salem, Arkansas and we are here to stay. We stand behind the quality of our furnaces 100%. We believe that we can give you a HIGH Quality furnace and save you thousands of dollars on these great furnaces, at the same time. See My Great 100% Perfect Feedback! Apr-05-98 in United States. 100.0% perfect feedback. The item “TOP LOADER Log Burner Outdoor Wood Burner Boiler Furnace Stove Outside 13,500 sf” is in sale since Thursday, April 25, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Other Heating, Cooling & Air”. The seller is “aware” and is located in Salem, Arkansas. This item can be shipped to United States.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Depth: 6 ft
• Width: 3 ft
• Material: Mild Steel
• Model: 633 Log Burner – Top Loader
• Non-Domestic Product: No
• Type: Wood heater
• Finish: Metal
• Color: Multicolor
• Year Manufactured: 2020
• Height: 3 ft
• Brand: HyProTherm

Incoming search terms:

• outdoor stove top loader