After dealing with a customer that threaded a 13.5 X 1 LH thread comp on to a 1/2 X 28 right hand threaded barrel and destroyed 2 comps. If you order this comp and install it on a barrel other then the barrel that is listed or damage the comp it’s your fault. Have your compensator properly installed by a licensed Gunsmith. This is the Range18 SIG Sauer P320 9MM Compensator with serrations works with the Sig Factory 13.5 X 1 Left Hand Thread Threaded barrel. It is recommended that these compensators be installed by a qualified gun smith. Damage to the threads can accrue when the comps is installed improperly. Do not use this compensator on a 1/2 X 28 Right Hand threaded Barrel. This is the New Range18 Sig P320 Compensator. The profile of the compensator is the same as the Sig Sauer P320 slide. The Range18 Sig P320 9MM Compensator works with the Sig Factory 13.5 X 1 Threaded barrel. Does not work with FAXON Barrels. The compensator is Anodized in black finish and will work with factory loads. The Range18 has been tested with the factory recoil spring. 100% US Made Anodized Black Sig 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the Sig Sauer P320. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P320. The Compensator redirects gas reducing felt recoil. Second, the redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig Sauer Slide giving it a clean installed look along with the added performance.
VINTAGE LYMAN 12 GAUGE CUTTS COMPENSATOR LONG RANGE CHOKE. Retains original blued finish and is nicely marked 12-Gauge Long Range, no apparent defects. Thank you for your interest in our item. We hope your experience with Curt’s Gun Shop will meet your expectations. Have a great day. We have been in business providing our customers with excellent service and great finds nearly 40 years. Our store is located in Mifflinville, Pennsylvania. We specialize in used firearms and historical militaria and stock a wide variety of unique items. Hope you will stop in for a visit soon. M-F 10-6 and 10-4 on Saturdays. We will answer your emails M-F 9-4. We strive to accurately describe each of our listings and add lots of clear photos. That being said, we understand that sometimes it is difficult to meet all buyers expectations. Sales to Other Counties. Many of the items we sell on-line are at least 50 and in some case well over 100 years old. On top of that many of the items have literally “been through a war”. We work hard to accurately describe each item and give an honest description that highlights any defect the item may have. More than just a pretty picture. Try Vendio Image Hosting. Make your listings stand out with FREE Vendio custom templates! FREE scheduling, supersized images and templates. Get Vendio Sales Manager. This item is in the category “Sporting Goods\Hunting\Vintage Hunting\Vintage Gun Parts”. The seller is “curtsgunshop” and is located in this country: US. This item can be shipped to United States.
New Sig P229 -P226 – P228 9mm compensator 13.5 X 1 LHT thread fits the Factory Sig barrel. Requires changing the recoil spring to an 11 LBS spring. If heavier loads are going to be fired it will require changing spring weight to adjust for the recoil. This listing is for the Compensator only. The compensator has been designed for the factory SIG threaded barrel. Recommended to be installed by a gun smith. 100% US Made Anodized Black Sig Sauer 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the SIG P229 firearm. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P229. The Compensator redirects gas reducing felt recoil, this redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 Comepsator was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig P229 Slide giving it a clean installed look along with the added performance. The item “Sig P226 -P228 P229 -9mm compensator 13.5×1 LHT thread Range18″ is in sale since Friday, March 27, 2020. This item is in the category “Sporting Goods\Hunting\Range & Shooting Accessories\Other Range & Shooting Accs”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped worldwide.
New Sig P226 – P228 – P229 compensator 13.5 X 1 LHT thread fits the Factory Sig barrel. Requires changing the recoil spring to an 11 LBS spring. If heavier loads are going to be fired it will require changing spring weight to adjust for the recoil. This listing is for the Compensator only. The compensator has been designed for the factory SIG threaded barrel. Recommended to be installed by a gun smith. 100% US Made Anodized Black Glock 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the SIG P226 firearm. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P226. The Compensator redirects gas reducing felt recoil, this redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 Comepsator was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig P226 Slide giving it a clean installed look along with the added performance. The item “Sig P226 P228 -P229 compensator 13.5×1 LHT thread Range18″ is in sale since Saturday, December 21, 2019. This item is in the category “Sporting Goods\Hunting\Range & Shooting Accessories\Other Range & Shooting Accs”. The seller is “custom_car-n-truck” and is located in Silver Springs, Nevada. This item can be shipped worldwide.
New Sig P226 – P228 -P229 compensator 1/2 X 28 RHT thread fits the Silenceco Sig barrel. Requires changing the recoil spring to an 11 LBS spring. If heavier loads are going to be fired it will require changing spring weight to adjust for the recoil. This listing is for the Range18 Comp only. The compensator has been designed for the Silenceco SIG threaded barrel. Recommended to be installed by a gun smith. 100% US Made Anodized Black Glock 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the SIG P226 firearm. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P226. The Compensator redirects gas reducing felt recoil, this redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 Comepsator was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig P226 Slide giving it a clean installed look along with the added performance. The item “Sig P226 P228 P229 compensator 1/2 X 28 RHT thread Range18″ is in sale since Tuesday, May 14, 2019. This item is in the category “Sporting Goods\Hunting\Range & Shooting Accessories\Other Range & Shooting Accs”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped worldwide.
SIG Sauer P320 9MM Compensator with serrations. Works with the Silenceco 1/2 X 28 Threaded barrel. Range18 SIG Sauer P320 9MM 1/2 X 28 RHT Compensator with Serrations to match. This is the New Range18 Sig P320 Compensator. The profile of the compensator is the same as the Sig Sauer P320 slide. The Range18 Sig P320 9MM Compensator works with the. Silenceco 1/2 X 28 Threaded barrel. Does not wok with FAXON Barrels. The compensator is Anodized in black finish and will work with factory loads. The Range18 has been tested with the factory recoil spring. 100% US Made Anodized Black Sig 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the Sig Sauer P320. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P320. The Compensator redirects gas reducing felt recoil. Second, the redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig Sauer Slide giving it a clean installed look along with the added performance. The item “Range18 SIG Sauer P320 9MM 1/2 X 28 RHT Compensator with Serrations to match” is in sale since Saturday, July 27, 2019. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped to United States.
SIG Sauer P320 9MM Compensator without serrations. Does not wok with FAXON Barrels. This is the New Range18 Sig P320 Compensator. The Comps are being made right now and are expected to be back from the anodizer in a few day. Be the first to own one. The profile of the compensator is the same as the Sig Sauer P320 slide. The Range18 Sig P320 9MM Compensator works with the Sig Factory 13.5 X 1 Threaded barrel. Does not wok with FAXON Barrels The compensator is Anodized in black finish and will work with factory loads. The Range18 has been tested with the factory recoil spring. 100% US Made Anodized Black Sig 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of theSig Sauer P320. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P320. The Compensator redirects gas reducing felt recoil. Second, the redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig Sauer Slide giving it a clean installed look along with the added performance. The item “Range18 SIG Sauer P320 9MM Compensator without Serrations match P320 Slide” is in sale since Wednesday, March 20, 2019. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped to United States.
SIG Sauer P320 9MM Compensator with serrations. Works with the Sig Factory 13.5 X 1 Threaded barrel. This is the New Range18 Sig P320 Compensator. The profile of the compensator is the same as the Sig Sauer P320 slide. The Range18 Sig P320 9MM Compensator works with the Sig Factory 13.5 X 1 Threaded barrel. Does not wok with FAXON Barrels. The compensator is Anodized in black finish and will work with factory loads. The Range18 has been tested with the factory recoil spring. 100% US Made Anodized Black Sig 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the Sig Sauer P320. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P320. The Compensator redirects gas reducing felt recoil. Second, the redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig Sauer Slide giving it a clean installed look along with the added performance. The item “Range18 SIG Sauer P320 9MM Compensator with Serrations to match 13.5 x 1 LHT” is in sale since Monday, February 4, 2019. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped to United States.
Range18 SIG Sauer P320 9MM Compensator with serrations threaded. 1/2 X 28 works with Silence Co Threaded barrel. Does not wok with FAXON Barrels. This is the New Range18 Sig P320 Compensator. The profile of the compensator is the same as the Sig Sauer P320 slide. The Range18 Sig P320 9MM Compensator works with the. 1/2 X 28 Threaded barrel. The compensator is Anodized in black finish and will work with factory loads. 100% US Made Anodized Black Sig 9MM Range18 Compensator. These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made. The Range18 Compensator was designed to add to the look and performance of the Sig Sauer P320. The Range18 Compensator comes Anodized in a flat Black finish. This Range18 Compensator was designed for the Sig P320. The Compensator redirects gas reducing felt recoil. Second, the redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig Sauer Slide giving it a clean installed look along with the added performance. The item “Range18 SIG Sauer P320 9MM 1/2 X 28 RHT Compensator with Serrations to match” is in sale since Wednesday, September 12, 2018. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “custom_car-n-truck” and is located in Reno, Nevada. This item can be shipped to United States.
