ENGLANDER PELLET STOVE AUGER MOTOR. PU-047040 / B4415UI / PH-CCW1H. 1 RPM, W/HOLE, COUNTER CLOCKWISE Rotation (When Facing Shaft). 120 V, 60 HZ, 1.03 Amps. 3/8 Diameter x 1 Length Shaft Flat Edge of Shaft for Securing with Set Collar. Wire leads measure 20 in length. We include both male and female spade connectors depending on your stoves configuration. Gearbox Measures 2 ¾ Wide x 4 5/8 High x 1 Width (Width to screw mount hole 1 5/16) Total width including magnet, armature and gearbox measures 2 1/8. Highest Durability and Lowest Operating Decibels. Exceeds all OEM & aftermarket motor standards. Earth Sense has invested extensive testing and time to insure the quality of this replacement motor is equal to or better than the OEM motor. NOTE: This motor runs cooler than the original and does not have or require the rear plastic cooling fan. This motor has wire leads for electrical connection instead of leads directly on the motor. Connection wires will plug in directly into wire leads; doesnt matter which wire connects to which lead. We guarantee 100% correct fit and function. 3/4 Mill flat section for set screw, also pre-drilled hole in shaft for set pin. 100% Best Price Guarantee. Over 2 5 years of trusted value and commitment to our customers. The item “Englander Stove Feed Auger Motor CCW 1 RPM with Hole, PU-047040 PH-CCW1H 2PK” is in sale since Friday, September 28, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Replacement Parts”. The seller is “esesstoves” and is located in Dale, Wisconsin. This item can be shipped worldwide.
- Type: Auger Feed Motor
- Brand: England Stove Works
- MPN: PU-047040 / B4415UI / PH-CCW1H
- Model: Many- See Description
- Country/Region of Manufacture: United States
HARMAN PELLET STOVE AUGER MOTOR – 4 RPM. We sell parts for many types of pellet stoves here in. We only list motors we have in-stock. It has been a cool summer in PA. I do not know what that means for the winter but I think we should. Take care of upgrades and repairs right away. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. Stoves use a 4 rpm motor and this model the shaft turns Counter-Clockwise when facing the output shaft. This motors is for older. Stoves that have chain driven augers but. Produces stoves requiring different RPMs and rotation direction. Please pay close attention to the models and serial number ranges at the bottom of the page but if you have a different model, please drop us a line. We carry most all. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw couples the motor to the auger. Some mounting hardware has to be used from the old motor. A new cooling fan is included and it is recommended that it be used. Included are two spade wire connectors in case you need them. Most stoves have ¼ connectors to attach the power to the motors. Some stoves built prior to 2000 have smaller connectors so a set of replacement connectors are included. Just crimp the connector on the wire if necessary. It doesn’t matter which wire goes to which connection as long as they are connected. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Counter- Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. Serial #84000 and below – free standing. Serial #12871 and below. Serial #8360001 and below. The item “NEW HARMAN PELLET / COAL STOVE AUGER MOTOR 4 RPM 3-20-08752 VERY QUIET k” is in sale since Saturday, December 13, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country/Region of Manufacture: United States
- Country of Manufacture: United States
- Brand: Does not apply
- Model: Harman
- MPN: Does not apply
Auger Motor and Nylatron style replacement auger bearing kit. Includes Auger motor, bearing, retainer nut, mounting plate, rubber bumpers, gasket & instructions. Whitfield (Lennox) Pellet stoves. WHITFIELD – ADVANTAGE (WP2) II. WHITFIELD – ADVANTAGE (WP2) II-T, III, II-T. WHITFIELD – ADVANTAGE PLUS (WP7). WHITFIELD – QUEST & QUEST PLUS (May require minor modification for motor clearance). WHITFIELD – PRODIGY & PRODIGY II (May require minor modification for motor clearance). WHITFIELD – RENNAISANCE (May require minor modification for motor clearance). Auger Bearing endplate is a direct replacement for Whitfield part numbers: 12153900, 13650072, 13052000 Auger motor is a direct replacement for Whitfield (Lennox) part number: 12046300. Before installing a new auger motor, look at your existing bearing. If it is Brass (bronze), you will need to replace it. This kit will be the correct upgrade for you. If you already have the Nylatron bearing and just need to replace it, you will need this item. REPLACEMENT LOWER AUGER BEARING – NYLATRON STYLE (4000). Brand New in the original packages! Auger Motor – 1 Year Bearing & Endplate – 180 Days. You should get your item within 1-2 business weekdays after it ships. In these cases, we recommend Priority. In m any cases, Priority will get it there just as fast. Please do not ask us to falsify the export documents. It violates USA export laws. The item must be in an as received condition and can not have been installed on your stove or any other application. Igniter, ignitor, winfield, advantage, profile, optima, advantage plus, quest, quest plus, traditions, t300p, t-300p, t-300-p, montage, quad, quadrafire, austroflamm, breckwell, harman, harmon, us stove, united states stove, englander, englands, heating element. The item “NEW WHITFIELD ENDPLATE UPGRADE PP4010 & XP7000 WITH PELLET STOVE AUGER MOTOR” is in sale since Friday, November 14, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “mr.pellethead” and is located in Pacific Northwest. Shipping to all 50. This item can be shipped to United States, Canada.
- Brand: PSP
- Model: 4010 & XP7000
- MPN: 12153900, 13650072, 13052000, 12046300
- Type: Auger Motor, Bearing, Endplate & Gasket
- WARRANTY: 180 Days
QUADRA-FIRE 800 NOVA & QUADRA-FIRE 1000 PELLET STOVE AUGER MOTOR. We sell parts for many types of pellet stoves here in. We only list motors we have in-stock. It has been a cool summer in PA. I do not know what that means for the winter but I think we should. Take care of upgrades and repairs right away. This motor is extremely quiet, to me it is almost silent. These Motors are rated for CONTINUOUS duty. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. Please remember QUADRA-FIRE 800 & QUADRA-FIRE 1000 PELLET stoves use a 1.3 rpm motor and the shaft turns counter-clockwise when facing the output shaft. This motor only fits these two models. The difference seems small but with a 1 RPM motor you are reducing the rotation by 30%. That means when the stove is set on minimum 30% less pellets will be sent to the fire and your stove may shut down. On the other end if you set the stove on high it will not produce as much heat as before because the auger now turning slower what the stove was. If in other ads, you see the power connections are close to the motor body it means the motor had a clockwise rotation when manufactured and someone has reversed the rotation by flipping it over. This shortens the life of the motor as the motor has to be precision aligned and the screws torque to specific amounts. The connectors should be away from the motor body as shown in the pictures. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw couples the motor to the auger. In most cases the motor is not attached to the stove frame. Included are two spade wire connectors in case you need them. Most stoves have ¼ connectors to attach the power to the motors. Some stoves built prior to 2000 have smaller connectors so a set of replacement connectors are included. Just crimp the connector on the wire if necessary. It doesn’t matter which wire goes to which connection as long as they are connected. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are soldered to the terminals, not just crimped. The output shaft is hardened steel to prevent wear. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Counter Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrantee and shorten the life of the motor. If you really needed. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. The item “1.3 RPM QUADRA FIRE 800 NOVA 1000 PELLET STOVE AUGER MOTOR 812-0170 j” is in sale since Thursday, December 19, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- Model: Does not apply
- MPN: Does not apply
ENGLANDER PELLET STOVE AUGER MOTOR – 2.4 RPM – CU-047042 CU047042. We sell parts for many types of pellet stoves here in. We only list motors we have in-stock. This motor is extremely quiet, to me it is almost silent. These Motors are rated for CONTINUOUS duty. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. Please remember this motor is for Englander stoves that use a 2.4 rpm motor and the shaft turns clockwise when facing the output shaft. A partial list of stoves and cross over part numbers is at the bottom. Other sellers provide a 2 RPM motor and call it a. But this is to slow. The difference seems small but with a. 2 RPM motor you are reducing the rotation by 25%. That means when the stove is set on minimum 25% less pellets will be sent to the fire and your stove may shut down. On the other end if you set the stove on high it will not produce as much heat as before because the auger now turning slower what the stove was. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Specific Englander instructions are included. Installation is easy; only one set screw couples the motor to the auger. In most cases the motor is not attached to the stove frame. Included are two spade wire connectors in case you need them. Most stoves have ¼ connectors to attach the power to the motors. Some stoves built prior to 2000 have smaller connectors so a set of replacement connectors are included. Just crimp the connector on the wire if necessary. It doesn’t matter which wire goes to which connection as long as they are connected. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are thermal welded to the terminals, not just crimped. The output shaft is hardened steel to prevent wear. Hese are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following Englander stoves. The item “2.4 RPM ENGLANDER STOVE AUGER MOTOR CU-047042 NEW VERY QUIET CU047042 i” is in sale since Saturday, March 01, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- MPN: CU-047042
- Country/Region of Manufacture: United States
- Country of Manufacture: United States
- Brand: Does not apply
