BRECKWELL PELLET STOVE AUGER MOTOR – 1 RPM. Breckwell Part Number C-E 017M or 80642 – NEW STOCK. We sell parts for many types of pellet stoves here in. We are starting to get ready for Winter here in PA. Time to take care of upgrades and repairs. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. You will also need a wiring harness to attach the auger motor to the control board. We include this harness, other sellers leave it to you to make it up. Please remember most BRECKWELL. Stoves use a 1 rpm motor and the shaft turns clockwise when facing the output shaft. The motor shaft be pinned to the auger – there is a hole in the shaft to acomodate this. Other models (after 2002) use a locking collar which require a beveled edge, this motor works with all these stoves. Partial list of stoves and cross over part numbers is at the bottom. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw or cotter pin couples the motor to the auger. In most cases the motor is not attached to the stove frame. Harness included connects the terminals on the rear of the motor to the control power strip o n the back of the stove. On the motor , it doesn’t matter which wire goes to which connection as long as they are connected. On the power strip the harness has one male and one female connection to mate up the proper terminal. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are thermal welded to the terminals, not just crimped. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrant y and shorten the life of the motor. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. All Breckwell stoves manufactured after 2002. The control panel has the heat setting – High – Med – Low. The control panel has the heat setting – Low – B – C – High. P23 models serial # 7166 and higher. P23 Insert serial # 2243. P24 – P24 Insert Serial# 53664 and higher. P2000 serial # 11780 and higher. P2000 Insert # 22208 and higher. P2700 serial # 8445 and higher. The item “BRECKWELL PELLET STOVE AUGER MOTOR 1 RPM C-E 017M 80642 VERY QUIET g” is in sale since Thursday, March 06, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- MPN: Does not apply
- Model: Does not apply
BRECKWELL PELLET STOVE AUGER MOTOR – 1 RPM. Breckwell Part Number C-E 017M or 80642 – NEW STOCK. We sell parts for many types of pellet stoves here in. We are starting to get ready for Winter here in PA. Time to take care of upgrades and repairs. This motor is extremely quiet, to me it is almost silent. Changing the auger motor is not very hard but it is a dirty and strenuous job gaining access. Not something you want to do every other year. This motor has features that increases it’s service life that others do not. This is top of the line quality, made in the USA. You will also need a wiring harness to attach the auger motor to the control board. We include this harness, other sellers leave it to you to make it up. Please remember most BRECKWELL. Stoves use a 1 rpm motor and the shaft turns clockwise when facing the output shaft. The motor shaft be pinned to the auger – there is a hole in the shaft to acomodate this. Other models (after 2002) use a locking collar which require a beveled edge, this motor works with all these stoves. Partial list of stoves and cross over part numbers is at the bottom. If your motor is loud on each cycle, making grinding noises, provides an uneven flow of pellets to the burn pot, is over 5 years old or gets extremely hot, then there is a good chance that a new motor will be needed soon. We recommend replacement of the Auger motor when you do your Fall clean up and maintenance work before the heating season starts. Keep your old one for a back up spare. Dont wait for your old. Motor to die when it is under the most load, that being the coldest part of the winter. Two or three days without your stove is more than an inconvenience. A frozen up house is a disaster. Installation is easy; only one set screw or cotter pin couples the motor to the auger. In most cases the motor is not attached to the stove frame. Harness included connects the terminals on the rear of the motor to the control power strip o n the back of the stove. On the motor , it doesn’t matter which wire goes to which connection as long as they are connected. On the power strip the harness has one male and one female connection to mate up the proper terminal. They are the latest revision of the original motor, keeping all the critical measurements so the motor can be used in place of the original without any modification. What has changed over the years is size of the power motor which drives the output shaft, the composition of the gear drive chain and the high temperature. (350 degree) encased in the motor. These motors just keep getting better and better. The oversize seal gasket acts a noise damper against the wall of the stove. The back of the power shaft is now sealed to prevent dirt or soot from entering and causing harm. The power motor now has a sealed bearing rather than the old bushing common on cheaper motors and the motor leads are thermal welded to the terminals, not just crimped. These are very powerful yet extremely quiet, weighing in at over 3.5 lbs they are manufactured to give you many, many years of faithful operation with no lubrication or any adjustments to be made on your part. This motor comes from the factory in Clockwise rotation. Beware of motors that are reversed at the dealer or dealers that give you instructions for reversing the direction. This will void the warrant y and shorten the life of the motor. If you really need. Please check with your government agency for the exact amount before you order. These charges are collected by the Canadian government and are not refundable by us. For use in the following. All Breckwell stoves manufactured after 2002. The control panel has the heat setting – High – Med – Low. The control panel has the heat setting – Low – B – C – High. P23 models serial # 7166 and higher. P23 Insert serial # 2243. P24 – P24 Insert Serial# 53664 and higher. P2000 serial # 11780 and higher. P2000 Insert # 22208 and higher. P2700 serial # 8445 and higher. The item “BRECKWELL PELLET STOVE AUGER MOTOR 1 RPM C-E 017M 80642 VERY QUIET g” is in sale since Thursday, March 06, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “pellet_parts_now” and is located in Titusville, Pennsylvania. This item can be shipped to United States, Canada.
- Country of Manufacture: United States
- Country/Region of Manufacture: United States
- Brand: Does not apply
- MPN: Does not apply
- Model: Does not apply
