So the factory roof rails are both rare, and not very good if you wish to use a full platform rack (such as a Front Runner or Rhino); you have to drill the rack + rails + shim it, as the rails are curved to match roof contour vs flat. Only aftermarket was Safety Designs, and (still) Voyager in the US, but that is old tech and both very expensive & hard to find. Pictures are of the first set produced, and there are some variables we can easily incorporate: different finishes (this was semi-gloss powder coating, but matte would look better with FR racks), or you could have it painted or powder coated to (near) match factory finish (black semi-gloss or matte included in price). The one pictured has the rails 1″ taller than “stock” allows for the carrying of a Front Runner table under FR’s rack using their table carrying accessory (this gives about 3″ of clearance at highest point of the roof). As these are built-to-order, if you wanted a lower profile the rails/feet can be fabricated down up to 2.25 if you wanted a low profile. Other options are minor things like the P38 logo can be deleted. Front of the rails have 2 mounting holes and two L brackets are included to allow for mounting a light bar or wind deflector. See my other listing if you just want a set of the plans to fabricate your own. These rails will work with some Thule or Yakima (or similar) racks that have a bottom channel that allows them to be mounted to the rails I would recommend a minimum of three cross bars for rigidity. With a platform rack, the entire system is incredibly solid—a RTT wouldn’t be any issue at all, and I’ve had almost 500lbs up there with zero issues. No cross bars or rack included. You will need to tell me what platform rack you are putting on your P38 as there are slight mounting differences between Rhino, Front Runner, etc. The rack shown is a slightly modified Front Runner LR3/LR4 rack–modification was the removal of 8 of length (about a 30 minute job with a hacksaw + metal file). The item “Range Rover P38 Roof Rails Rack” is in sale since Wednesday, July 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “mikopdah_0″ and is located in Pasadena, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Montserrat, Bangladesh, French guiana, Guernsey, Jersey, Liechtenstein, Monaco, Macao, Martinique, Pakistan.
- Country/Region of Manufacture: United States
- Weight Capacity: 500lbs
- Material: Steel
- Number of Pieces: 4
- Type: Roof Rail Rack
- Features: Adjustable
- Color: Black
- Surface Finish: Powder-Coated
- Manufacturer Part Number: P38RRFR
- Placement on Vehicle: Roof
- Brand: P38 Customs
- Fitment Type: Direct Replacement
- Warranty: 60 Day
- Mounting Hardware Included: Yes
FOR REAR LAMP GUARDS LAND ROVER PART NUMBER STC8027. EXTERIOR GRADE HEAT AND WATER RESISTANT ALUMINUM MOUNTING HARDWARE KIT. The lamp guards (STC8027) in the photo are not included. This listing only for aluminum mounting hardware kit to fit the lamp guards. 4x aluminum mounting hardware. 4x M8-1.25 Button Head Socket Cap Screws. 1x 5mm (also know as M5) Metric Short Arm Hex Keys / Allen Wrenches. This is custom made aluminum mounting hardware (could paint this hardware to match your truck or any color). For the Range Rover Classic rear lamp guards. Unlike the original mounting hardware, these mounts are unbreakable and will not deteriorate over time. New M8-1.25 Button Head Socket Cap Screws. Material : Black Alloy Steel Class 12.9. Head Style: Button Head. New 5mm (also know as M5) Metric Short Arm Hex Keys / Allen Wrenches. Select Proceed to Checkout. We understand that there are many reasons why you may wish to return part(s) or may even wish to cancel your order. Return of parts (within 30 days). You can cancel your order (in writing) any time before it has been dispatched. An order may not be cancelled after it has been dispatched or while it is in transit, but must be treated as a return. You must immediately return the goods at your own cost (carriage charges are non-refundable). Please note that all goods must be in the condition supplied at the point of sale and with their original. No responsibility can be accepted for goods received by us, damaged. Your statutory rights remain unaffected. Occasionally the wrong item is sent to a customer. If you have been incorrectly charged, we will correct the discrepancy. In some instances, the value of the goods may not make it a viable proposition to send back to us and in these circumstances. We may ask for photographic evidence or write off the goods. Exchanges will only be made where the same item is available in stock at the same price as the original. Items bought at special offer prices cannot be subsequently exchanged for identical items on sale at higher prices. Before we can send out the replacement. And so we can send out a replacement immediately. Information about your package. Standard Operating Procedures for destination country will apply, and signature may or may not be obtained. For packages requiring the signature for release. You will not be charged for a signature service. For packages not requiring a signature for release. Post drivers will leave the package at a recipient’s door, or other secure location, if the driver believes it is reasonable to do so. And that is considered to be their full responsibility (with no exclusions). Add a map to your own listings. The item “FOR RANGE ROVER CLASSIC REAR LAMP GUARDS STC8027 ALUMINUM MOUNTING HARDWARE KIT” is in sale since Wednesday, October 18, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Other”. The seller is “lrnj_autoparts” and is located in Lutz, Florida. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: United States
- Custom Bundle: No
- Interchange Part Number: RANGE ROVER CLASSIC GUARDS STC8027 FIX KIT
- Type: aluminum mounting hardware kit
- Color: Silver
- Manufacturer Part Number: STC8027FITKIT
- Other Part Number: STC8027
- Brand: LRNJ Auto
- Fitment Type: Performance/Custom
- Non-Domestic Product: No
- Warranty: 1 Year
Wide heavy duty 5 landing ledge (Bull nose) provides extra work. 12 x 12 heavy duty cast iron top grates and burners rated at 26,000. Top Griddle plate can be converted into a thermostatically control. (1) One Thermostat for every (2) two burners. Safety valve shuts off the gas in case the pilot flame turns off. 2 1/2 wide stainless steel grease through for 3/4 thick griddles and. Large capacity full width crumb tray for open burners or broilers. Stainless steel sides and front. Double side panels with insulation. Separate heavy duty manual control knobs for each burner. 35,000 BTUs for oven. Adjustable oven thermostat ranges temperatures from 150 to 500. One chrome plated rack that can be adjusted in two different. Complies with NSF/ANSI Std. Rethermalization, and Powered Hot Food Holding and Transport Equipment. Conforms to ANSI STD Z83.11 Certified to CSA STD 1.8. The item “New 72 Range with Griddle, Broiler, 4 burners & 2 Ovens ETL Made in USA by Ideal” is in sale since Saturday, June 1, 2019. This item is in the category “Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Cooking Equipment\Commercial Broilers”. The seller is “beatrisori-0″ and is located in Azusa, California. This item can be shipped to United States.
- Model: IDRG-4G24B24(2)
- Modified Item: No
- Country/Region of Manufacture: United States
- Custom Bundle: No
- Brand: Ideal Commercial Cooking Products, Inc
- Heavy Duty Combo 48 Oven Range: Top of the line 72″ Commercial Range @ 290,000 BTU
: 22 HRE 948RL Wheels for Range Rover from Wheels Boutique :. These HRE forged three piece 22’s are ready for a new home on your Full Size Range Rover! The 8-spoke style wheels have a gloss white face/center with polished clear lips. Finish can be customized upon request. Application: Land Rover Range Rover – Full Size 2013+. Wheel Widths : 10.5 Front/Rear. Wheel Finish : Gloss White / Polished Clear. Center caps: HRE Caps Included. Tires: Not included but available. We are the world’s largest distributor of HRE and ANRKY Wheels, and we also carry Vorsteiner, Rotiform, Avant Garde, Forgiato, American Force, Advan, Rays Engineering, Work Wheels, Forgeline, TechArt, Novitec, Liberty Walk, 1016 Industries, Brabus, Mansory, Cobb Tuning, RENNTech, WALD, iPe Exhaust, Akrapovic, Capristo, Fabspeed, Tubi, Kline, Champion Motorsports, BBS, Brembo, Baer, StopTech, Hamann, Eisenmann, BMC, AFE, KW, H&R, Tein, Ohlins, Eibach, Fox, ProComp, Pirelli, Michelin, Nitto, Dunlop, Goodyear, Falken, Hoosier, Continental and tons more…. The item “RANGE ROVER 22 HRE 948RL WHEELS 22×10.5 GLOSS WHITE POLISHED” is in sale since Friday, July 3, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Wheel & Tire Packages”. The seller is “wheelsboutique” and is located in Miami, Florida. This item can be shipped to United States.
- Rim Manufacturer Part Number: 90702
- Rim Structure: Three Piece
- Country of Manufacture: United States
- Rim Material: Alloy
- Rim Brand: HRE
- Car Type: Range Rover
- Offset: ET39 Front, ET24 Rear
- Country/Region of Manufacture: United States
- Bolt Pattern: 5×120
- Rim Diameter: 22
- Number of Bolts: 5
- Rim Width: 10.5″
Johnson Rod Lift Kits are made from stainless steel and are stronger than the original factory equipment which is made from plastic. However, because of their design, they provide key lateral flexibility like the original part to protect your height sensor equipment. Johnson Rods are not adjustable and are therefore very reliable like the original equipment part. The key to a good modified height sensor rod is for it to be accurate in length and to fit tight like the original. Johnson Rods are designed for accuracy and dependability. Trail tested and tough, Johnson Rods will increase your off road opportunities and limit the potential for damage with added clearance and the ability to install larger tires. Don’t get fooled and be taken advantage of by cheap lift rod copies made of plastic or thin twisted metal. Many customers come to me after making this mistake, These cheaper made products will bend and break easily. They have very thin rubber grommets and don’t hold tight causing problems with the system. Johnson Rods are solid and made with thick stainless steel that will not bend, rust or be affected by harsh weather. The Johnson Rod grommets are much wider like the original part which insures you have a good fit. This is why Land Rover dealers order and use Johnson Rods. This kit provides 2.5 inches of lift for the Range Rover Sport L320 2005-13. Note: We have other kits for the Range Rover Sport (L494), Full size Range Rover (L322 and L405), Discovery 5, LR3, LR4 and Velar. Send us a picture of your vehicle #johnsonrods follow us on Instagram. The item “Range Rover Sport Lift Kit 2005-13″ is in sale since Wednesday, January 16, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “johnsonrodslr3″ and is located in La Quinta, California. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: United States
- Lift Height: 2.5 inches
- Adjustable: No
- Manufacturer Part Number: L320
- Part Type: Suspension Lift Kit
- Included Hardware: Four suspension height rods
- Placement on Vehicle: Front
- Other Part Number: 2005-13
- Brand: Johnson Rods
- Fitment Type: Direct Replacement
- Non-Domestic Product: No
- Warranty: 1 Year
