Material: Stainless Steel Liner & Galv Jacket. Type L; model VP thru the wall 4 pellet stove pipe installation kit. Inner wall stainless steel, outer wall paintable galvanized pipe. Rolled over Male end eliminates sharp edges. Internal spacing bead assures uniform insulating air space between pipe walls. Kit contains 1 horizontal cap, (1) 90 deg. Elbow, 1 wall bracket, (5) 1´ pipe lengths, 1 tee with cleanout, 1 wall thimble, 1 tee support, (1) 3″ to 4″ increaser, (1) 4″ pipe connector, and (1) 3″ pipe connector. This item has been made/built to U. Specifications – International Buyers, please see International Limitations section below. Product manuals, instructions and safety warnings may not be in destination country languages. The products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements. The products may not conform to destination country voltage and other electrical standards requiring additional modifications and/or electrical adapters/converters to be used in countries other than the U. ATTENTION: Double check your address when checking out. You are responsible for the address you provide at the time you place your order. We make no warranties, expressed or implied, beyond this period, unless otherwise specifically and expressly stated. Drivers do not assist with unpacking, set up or clean up, and cannot bring the order into your home, so make sure you have help available. The item “4-inch Selkirk VP Pellet Pipe Thru-the-Wall Type L Pellet Stove Kit” is in sale since Friday, July 08, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Furnaces & Heating Systems”. The seller is “rutkowskidb” and is located in New Britain, Connecticut. This item can be shipped to United States.
- Brand: SELKIRK
- Model: 284875
- MPN: 284875
- Country/Region of Manufacture: United States
Hunter Space Heater – H-45 Type II Multi-Fuel Stove/Heater Tent Heater, Liquid Fuel. Qualified to military specifications. Adjustable fuel input for temperature control. Multi-fuel, high efficiency burner. Operates and starts at temperatures down to -60ºF (-51.1°C). Field proven for more than 25 years. New unit provides for safe, reliable heating using a fuel vaporizing technology. The exhaust stack (included) safely vents outside all exhaust products. The H-45 space heater is 45,000 BTU heater that is designed to provide heat for the general purpose tents (small, medium and large), temper tents. The H-45 heater operates without the use of electrical power and can be used in moderate to arctic conditions. It will use Df-A arctic diesel fuel oil or DF-1 winter diesel fuel oil or DF-2 regular diesel fuel oil or JP-5 jet fuel. This unit provides safe, reliable heating using a fuel vaporizing technology that has been tested in the laboratory and in the field. The H45 heater has been in service for many years and thousands of units have been put to use. The exhaust stack safely vents all exhaust products outside. We just got fuel stands for these see our other items. This unit provides for safe, reliable heating using a fuel vaporizing technology that has been tested in the laboratory and in field tests. Operates without the use of electrical power and can burn many types of liquid fuel. (DF-2, DF-1, DF-A, JP-5, JP-8) The new vaporizing R-tube burner technology eliminates these deficiencies while still maintaining simplicity, ruggedness, and low cost. Liquid multi-fuel space heater and is designed for heating the general purpose tents, small and large. Adjustable heat output of 20,000 to 45,000 BTU/hr. Has six 2 foot sections of stovepipe and a spark arrestor cap for the stovepipe. 17.5 in diameter x 25.5 inches tall 75 lbs. Non-powered vented heat for camp, tent or shelter Liquid multi-fuel burner uses kerosene, diesel, and JP5 Field proven Reaming tool 6 piece Exhaust stack, up to 12 ft. Fuel control valve Stack cap spark arrestor Gravity feed kit Lid Oil Burner assembly Hose overflow, hose supply Print Technical manual This unit provides reliable heating using a fuel vaporizing technology that has been tested in the laboratory and in the field. The exhaust stack (included) vents all exhaust products outside. ” ” The H45 space heater is a 45,000 BTU heater that is designed to provide heat for the GP and TEMPER tents. Check out our other items with just got the stands for these. US GI Large Radiant Space Heater, Type II H-45. This liquid burning GI issue radiant space heater is the real deal. Stoves are in original boxes in unused condition! Runs with liquid fuel of your choice (including DF2, DF1, DFA, JP5 and JP4-8, Diesel Fuel). Manufactured by Hunter Manufacturing. The unit is complete It has the following parts: Stack Cap Assembly, Stack Pipes, Burner Reaming Tool, Lid Assembly, Top Heater Shell, Burner Cap Assembly, High Fire Ring Clamp, High Fire Ring, Burner Shell Assembly, Super Heater, Down Tube, Burner Up Tube, Heater Body Base, Fuel Flow Control, Base Heater Door, Primer Cup, Bracket Support, Flow Control Burner Hose Assembly, Primer Valve, Overflow Hose Assembly, Supply-Flow Control Hose Assembly. The H45, more commonly know in the field as the pot belly stove, is a non-powered, freestanding, liquid multi-fuel space heater and is designed for heating the military’s general purpose tents, small and large. The item “NEW H-45 Type II Hunter Multi fuel Tent Heater stove H45 liquid fuel H45″ is in sale since Saturday, November 15, 2014. This item is in the category “Sporting Goods\Outdoor Sports\Camping & Hiking\Generators & Heaters”. The seller is “robrobyn” and is located in Fort Smith, Arkansas. This item can be shipped to United States.
- Brand: Hunter
- Model: H-45
- MPN: Does Not Apply
- Country/Region of Manufacture: United States
