New, unused, laminated Long Range target/Tactical stock with Accublock from Stocky’s for a Short Action Remington 700 BDL. Completely finished and unaltered – never been fitted to a barreled action. The Accublock is an aluminum bedding block permanently mounted into the laminated stock, with integral bedding pillars – see pictured. Three sling swivel studs and a Pachmayr recoil pad. This is a substantial reduction from Stocky’s sale, or even special, prices. Absolutely no sales of firearms parts or accessories outside the United States. The item “New Stocky’s Accublock Long Range Target/Tactical 700 BDL SA Laminate” is in sale since Thursday, February 20, 2020. This item is in the category “Sporting Goods\Hunting\Gun Parts\Rifle”. The seller is “h*d*p*t” and is located in Cincinnati, Ohio. This item can be shipped to United States.
- For Gun Make: Remington
- Model: LRT
- Modified Item: No
- Country/Region of Manufacture: United States
- Specific Part: Stock
- Compatible Caliber: .308
- Part Material: Laminated wood, aluminum, and steel
- Type: Stock & Forend Parts
- MPN: TCT700BDL-ALU
- For Gun Model: Remington 700 SA BDL
- Brand: Stockys
So the factory roof rails are both rare, and not very good if you wish to use a full platform rack (such as a Front Runner or Rhino); you have to drill the rack + rails + shim it, as the rails are curved to match roof contour vs flat. Only aftermarket was Safety Designs, and (still) Voyager in the US, but that is old tech and both very expensive & hard to find. Pictures are of the first set produced, and there are some variables we can easily incorporate: different finishes (this was semi-gloss powder coating, but matte would look better with FR racks), or you could have it painted or powder coated to (near) match factory finish (black semi-gloss or matte included in price). The one pictured has the rails 1″ taller than “stock” allows for the carrying of a Front Runner table under FR’s rack using their table carrying accessory (this gives about 3″ of clearance at highest point of the roof). As these are built-to-order, if you wanted a lower profile the rails/feet can be fabricated down up to 2.25 if you wanted a low profile. Other options are minor things like the P38 logo can be deleted. Front of the rails have 2 mounting holes and two L brackets are included to allow for mounting a light bar or wind deflector. See my other listing if you just want a set of the plans to fabricate your own. These rails will work with some Thule or Yakima (or similar) racks that have a bottom channel that allows them to be mounted to the rails I would recommend a minimum of three cross bars for rigidity. With a platform rack, the entire system is incredibly solid—a RTT wouldn’t be any issue at all, and I’ve had almost 500lbs up there with zero issues. No cross bars or rack included. You will need to tell me what platform rack you are putting on your P38 as there are slight mounting differences between Rhino, Front Runner, etc. The rack shown is a slightly modified Front Runner LR3/LR4 rack–modification was the removal of 8 of length (about a 30 minute job with a hacksaw + metal file). The item “Range Rover P38 Roof Rails Rack” is in sale since Wednesday, July 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “mikopdah_0″ and is located in Pasadena, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Montserrat, Bangladesh, French guiana, Guernsey, Jersey, Liechtenstein, Monaco, Macao, Martinique, Pakistan.
- Country/Region of Manufacture: United States
- Weight Capacity: 500lbs
- Material: Steel
- Number of Pieces: 4
- Type: Roof Rail Rack
- Features: Adjustable
- Color: Black
- Surface Finish: Powder-Coated
- Manufacturer Part Number: P38RRFR
- Placement on Vehicle: Roof
- Brand: P38 Customs
- Fitment Type: Direct Replacement
- Warranty: 60 Day
- Mounting Hardware Included: Yes
UBIQUITI UniFi AC Long Range, UAP-AC-LR, 1317 Mbps AP/Hotspot 2,4/5 GHz, 802.11ac, MIMO 3×3 – indoor, Package includes 24V Gigabit PoE adapter. The UniFi AC LR AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for long-range deployment of high-performance wireless networks. Dual-Radio Performance, Gigabit Speeds. The UniFi AC Long Range delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquitis disruptive pricing strategy. The UniFi AC Long Range can work with wireless data transfer up to 1317 Mbps, standard 802.11a/b/g/n/ac is supported, UniFi uses MIMO 3×3 antennas system 3dBi. The signal range is up to 183 m. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high transmit power does for connecting distant clients. Scalable Enterprise Wi-Fi Management. The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field. Package includes 24V GigE PoE adaptor. Dimensions: 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70). Weight: 240 g (8.5 oz). Weight With Mounting Kits: 315 g (11.1 oz). Networking Interface: (1) 10/100/1000 Ethernet Port. Antennas: (1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi. Wi-Fi Standards: 802.11 a/b/g/n/ac. Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return). Power Supply: 24V, 0.5A Gigabit PoE Adapter. Maximum Power Consumption: 6.5W. Maximum TX Power: 2.4 GHz, 24 dBm. 5 GHz, 22 dBm. BSSID: Up to Four per Radio. Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES). Certifications: CE, FCC, IC. Mounting: Wall/Ceiling (Kits Included). Operating Temperature: -10 to 70° C (14 to 158° F). Operating Humidity: 5 to 95% Noncondensing. Advanced QoS: Per-User Rate Limiting. Guest Traffic Isolation: Supported. WMM: Voice, Video, Best Effort, and Background. 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps. 802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40). 802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80). 802.11b: 1, 2, 5.5, 11 Mbps. 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps. The item “Ubiquiti UAP-AC-LR Unifi Long Range WiFi PoE Wireless Access Point, 802.11ac New” is in sale since Sunday, December 9, 2018. This item is in the category “Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points”. The seller is “wifi-stock” and is located in Kaunas. This item can be shipped worldwide.
- Network Connectivity: Wireless-Wi-Fi 802.11ac
- Model: UAP-AC-LR
- MPN: UAP-AC-LR
- Country/Region of Manufacture: United States
- Brand: Ubiquiti Networks
- Max. Wireless Data Rate: 1317Mbps
- Dimensions: 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70″)
- Weight: 240g
Tan Pistol case with pre-cut custom foam. Holds up to four pistols. Black Seahorse SE630FP4 – 4 pistol / 12 magazine range case. Holds 4 semi-automatic handguns (up to a 1911) and 12 magazines. Additional large accessory space to hold ammunition, eyes, ears, etc. High performance foam insert is made of cross link polyethylene and is 2 lb closed cell. Closed cell foam is durable and will resist cleaners and lubricants utilized in gun maintenance. Ideal for transporting guns to the shooting range. Automatic pressure equalization system. Padlock holes (Fits standard size Masterlocks®). Comes with one Pelican Lock. 17, 19, 22, 23, 24, 26, 27, 28. 29, 30, 31, 32, 33, 36, 37, 38, and 39. This high performance foam insert is made up of a cross link Polyethylene foam. Inside dimensions – 16.00″ x 11.60″ x 6.20. Outside dimensions – 17.50″ x 14.20″ x 7.50. Weight with foam – 8 lbs. The item “Tan Seahorse 4 Handgun / Pistol range case with foam & Pelican 1450 lock” is in sale since Sunday, January 27, 2019. This item is in the category “Sporting Goods\Hunting\Gun Storage\Cases”. The seller is “cvpkg-casecompany” and is located in Carlsbad, California. This item can be shipped worldwide.
- Brand: Seahorse
- Model: SE630FP4
- MPN: Does Not Apply
- Number of Guns: 4
- For Gun Type: Handgun
- Features: Lock
- Country/Region of Manufacture: United States
REBUILT MOTOR, 260 hp 4 BBL GM V-8 350 cu. Fits 1978 Thru 1982. Fits Serial #’s 4908850 thru 6218461. THIS ENGINE SERIAL # 5931483. # 1 180 / # 2 170 / # 3 175 / # 4 165. # 5 175 / # 6 165 / # 175 / # 8 165. Alternator Output 13.5 Volts. Oil Pressure 40 psi at. Idle – checked w/Mechanical gauge. Freshwater Motor had been rebuilt 215.6 Hours. Runs good, no carb. Problems, fires right up! Marine Repair Shop LLC. Weight with Pallet :: 835 lbs. Pallet 40 x 40 x 40 high bolted to pallet, secured. This will Crated, boxed & wrapped. Mike, owner with Any Engine Questions. The item “MerCruiser 260 hp 4 BBL 350 GM V-8, Complete Drop In Marine Engine, Serial 5931483″ is in sale since Wednesday, December 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Sterndrive Motors & Components\Complete Sterndrive Engines”. The seller is “marinerep35c2″ and is located in Gravois Mills, Missouri. This item can be shipped to United States.
- MerCruiser 260 hp 4 BBL GM V-8 350 cu.in: MerCruiser Drop In Marine Engine 260 hp 1978-1982
- Country/Region of Manufacture: United States
- Manufacturer Part Number: Ser.5931483,Fits Serial Range 4908850 thru 6218461
- Brand: MerCruiser
- Stroke: 4 BBL
- Engine(HP): 260 hp
- Warranty: 30 days-certified mechanic Installs-Void if not
