UP FOR YOUR CONSIDERATION. 2-EAW JF50s 2-WAY FULL RANGE COMPACT ENCLOSURES. VERY CLEAN CONDITION, WORK LIKE NEW! A 2-way full range system (passive LF/HF crossover) in a compact asymetrical left and right trapezoidal enclosure. Includes 2x 5.25-in woofers and a 1-in soft dome tweeter. Impedance is switchable: 4 Ohms or 16 Ohms. The JF50S is engineered for exceptional performance in the nearfield from a compact enclosure. Left and right side drivers are magnetically shielded for use on either side of video monitors. Very effective as a fill/delay element in larger overall systems or for foreground/background music reproduction. A & E SPECIFICATIONS. The two-way full range loudspeaker systems shall incorporate 2x 5.25-in LF transducers and a 1-in soft dome tweeter HF transducer. All drivers shall be magnetically shielded allowing the system to be used in immediate proximity to video monitors. The LF drivers shall be mounted in a vented enclosure tuned for optimum low frequency response. An internal passive filter network shall provide fourth order acoustical crossover and system equalization. System frequency response shall vary no more than ±3 dB from 98 Hz to 17 kHz at 4 Ohms or 111 Hz to 17 kHz at 16 Ohms measured on axis. The loudspeaker shall produce a Sound Pressure Level (SPL) of 91 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 119.4 SPL on axis at 1 meter. The loudspeaker shall handle 175 Watts of amplifier power (AES Standard). The system shall include an impendance switch allowing the user to choose between 4 and 16 Ohm operation (nominal impedance). The system shall have nominal coverage angles of 120° (h) x 80° (v). The loudspeaker enclosure shall be asymmetrically tapezoidal in shape. It shall be constructed of 1/2-in thickness voidfree cross-grain-laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black catalyzed polyurethane. Input connectors shall be dual Neutrik NL4 Speakon. 2x 3/8-16 threaded mounting/suspension points (1 each top and bottom) plus 4x 1/4? 20 threaded mounting/suspension points to accept Omnimount Series 75 shall be provided. The front of the loudspeaker shall be covered with a vinyl coated perforated steel grille backed with open cell foam to protect against dust. The two-way full range loudspeaker shall be the EAW model JF50S. Specify left or right. Use hard and soft foam to pack. Sometimes bubble wrap depending on what it is. Please checkout my other auctions for more Professional. Audio, Video & Stage Lighting Equipment From Around Central Florida. Track Page Views With. Auctiva’s FREE Counter. The item “EAW JF50s 2-WAY FULL RANGE COMPACT ASYMETRICAL TRAPEZOIDEL ENCLOSURES, CLEAN” is in sale since Monday, April 8, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Speakers & Monitors”. The seller is “member5850048″ and is located in Davenport, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
- Model: JF50s
- Country/Region of Manufacture: United States
- Type: Nearfeild Compact Enclosure
- Features: Impedance Switch: 4 Ohms or 16 Ohms.
- Active/Passive: Passive
- RMS Power: 175W
- MPN: JF50S
- Brand: EAW
This is a 4-season 5m dia. Bell tent, usually can fit 8-10 persons. The door and the window has mesh, also there has a zipper in the ground sheetand the zipper in the ground is SBS brand. Our fabric is 300gsm canvas, and our mat is 540gsm pvc, most bell tent is 285gsm, so our bell tent is thicker than others. Our bell tent has a electric entry on the right side wall, but not in the back, plz notice that. Specification: Diameter:5M/16.4ft Door: 2.2(W)1.7m(H) Wall Height: 0.6m/: with gauze Roof Height:3m, Central pole:dia32mm; aluminum Stakes: 24pieces, 5mm steel, 26cm on length Fabric: 100% cotton canvas, 300gsm, PU coating, water proof, mildew resistant. Ground sheet: 540gsm ripstop PVC, waterproof. With Zipped in Ground Sheet. Net: 40gsm white, both on door and windows. 32mm galvanized steel tube, 1.5mm thickness, copper-zinc coated. A frame pole: Dia. 19mm galvanized steel tube, 1.2mm thickness, copper-zinc coated. Windows: 4 side windows & 4 vents on the apex, with mesh. Door: 1 zipper door, zipper Mesh door with flap. Rope: 6mm Nylon ropes, 2.4m9pcs; 3.5m1pc Product size:500300170/60 cm Package Size110X35X38cm WeightAppro. Caring your tent: 1. Always dry your tent before you pack it away to store. Never keep the tent stored away wet for longer than two days otherwise fungus can affect the canvas which will then create permanent marks. The canvas has been impregnated with an anti-fungal waterproofing agent that is effective for up to 60 weeks of use (so a year). Once you have passed this period of camping you may need to re-proof certain areas that appear more translucent. Maintenance starts when setting up your Bell Tent. If a Bell Tent has not been set up correctly uneven forces will pull on the canvas. This could eventually lead to damage. To ensure your tent stays set up correctly daily guy rope maintenance is necessary. It is in your interest to keep the canvas as clean as possible and remove stains when created. Dust and dried mud is best removed once the canvas is dry by brushing with a clean hard brush like a floor scrubbing brush. The lifespan of your tent is very dependent upon camping conditions such as air pollution, ultraviolet radiation, natural dirt (bird droppings, sand, salt water) and domestic dirt (cooking stains, soda, wine, sun cream). Fungus and stains Due to insufficient ventilation, fungus can affect the canvas. It is important to store your tent dry so no fungus or other stains can appear. Only use specialized tent cleaning products to remove difficult stains as other chemical products can cause the cotton to leak. We suggest you have your tent re-impregnated with waterproofer if any area has been cleaned using a cleaning product. Leaking Cotton can, when new, let some air through and leak around the seams. After the canvas has been wet once this will no longer happen because of the cotton expanding. Very light stains can appear on a wet tent – these stains cause no problems. In order to preserve your tents water resistance and prolong its lifespan after a considerable amount of use, the outside of the canvas can be re-treated with a sealant. There are many good spray can sealants on the market, and we also sell re-proofer. Zippers :Zippers sometimes have to endure extreme tension caused by wind, incorrect tent set up or pressure caused by people or objects leaning into the tent. In order to limit damage to any zippers:Close all zippers before setting up your tent. The item “4-Season Bell Tent 5M Canvas Tent Waterproof Glamping+Stove Jack fit for 6person” is in sale since Thursday, October 12, 2017. This item is in the category “Sporting Goods\Outdoor Sports\Camping & Hiking\Tents & Canopies\Tents”. The seller is “playdo8″ and is located in Rowland Heights, California. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- Bundle Listing: Yes
- Model: 700018
- Style: Teepee
- Season: 4 Season
- Material: Canvas
- Type: Bell Tent
- Capacity: 6 Person
- Features: Winter Use
- Color: Beige
- MPN: Does Not Apply
- Brand: Unbranded
This is a 4-season 6m dia. Bell tent, usually can fit 10-12 persons. The door and the window has mesh, also there has a zipper in the ground sheetand our zipper in the ground is SBS brand. Our fabric is 300gsm canvas, and the mat is 540gsm pvc, most bell tent is 285gsm, so our bell tent is thicker than others. Our bell tent has a electric entry on the right side wall, but not in the back, plz notice that. Specification: Diameter:6M/19.7ft. Door: 2.3(H)1.8m(W). Wall Height: 0.6m/: with gauze. Roof Height:3.5m. Central pole:dia 32mm; aluminum. Fabric: 100% cotton canvas, 300gsm, PU coating, water proof, mildew resistant. Ground sheet: 540gsm ripstop PVC, waterproof , With Zipped in Ground Sheet. Net: 40gsm white, both on door and windows. 32mm galvanized steel tube, 1.5mm thickness, copper-zinc coated. A frame pole: Dia. 19mm galvanized steel tube, 1.2mm thickness, copper-zinc coated. Windows: 4 side windows & 4 vents on the apex, with mesh. Door: 1 zipper door, zipper Mesh door with flap. Rope: 6mm Nylon ropes, 2.4m9pcs; 3.5m1pc. Stakes: 5mm steel, 26cm on length. Product size:600300170/60 cm. The item “6M Canvas Bell Tent Ultimate Yurt Glamping Outdoor Camping Beige with Stove Jack” is in sale since Sunday, January 14, 2018. This item is in the category “Sporting Goods\Outdoor Sports\Camping & Hiking\Tents & Canopies\Tents”. The seller is “playdo8″ and is located in Rowland Heights, California. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Bundle Listing: Yes
- Model: 70016
- Style: Pyramid
- Season: 4 Season
- Material: Canvas
- Fabric: 100% cotton canvas, 300gsm, PU coating
- Ground sheet: 540gsm ripstop PVC, waterproof , With Zipped in Ground Sheet
- Product size: 600*300*170/60 cm
- Package Size: 110X35X32cm
- Type: Bell tent
- Capacity: 10 -12Person
- Weight: Appro. 44kg
- Features: With electric entry point
- Color: Beige
- MPN: Does Not Apply
- Brand: Unbranded
22LR LE Conversion Kit For Glock 19 23 Generation 4 With Range Bag. Only use on a Generation 4 Glock frame. This package includes the conversion kit, one magazine, speed loader and range bag. 22 LR conversion kit. ADJUSTABLE SIGHTS The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. LAST ROUND LOCK OPEN. The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on’Advantage Arms’. 22LR Conversion Kits for the GLOCK pistol. INTERNAL FIRING PIN SAFETY. Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. FINISH All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. THE 10 SECOND INSTALLATION Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. COMPATIBILITY OF OUR CONVERSION KITS FOR GLOCK PISTOLS. Our Conversion Kits are made to work on FACTORY STOCK Glock frames. Note: Aftermarket parts such as trigger bars and connectors, especially the Ghost Connector, can adversely affect the function and reliability of your conversion kit. FACT: You will have paid for your ADVANTAGE ARMS, INC. Conversion kit after shooting 1000 rounds. Will your kit work on my Polymer 80% or aftermarket frame? No, The Advantage Arms conversion kit for the Glock pistol is designed to fit and function on factory stock Glock receivers. Our kits were not designed for, nor do we indorse, using them on the Polymer 80% or any other aftermarket receiver. The item “Advantage Arms. 22LR LE Conversion Kit For Glock 19 23 Generation 4 With Range Bag” is in sale since Friday, October 5, 2018. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “tactideals” and is located in Houston, Texas. This item can be shipped to United States.
- Non-Domestic Product: No
- For Gun Make: GLOCK
- Modified Item: No
- Country/Region of Manufacture: United States
- Custom Bundle: No
- MPN: AAG19-23 G4
- For Gun Model: G19, G23 Generation 4
- Brand: Advantage Arms
