Long range locators are normally used alongside conventional metal detectors. The locators can quickly scan a wide area and determine if a concentration of gold or other valuables are within the reach area of the instrument. If no target is picked up, the operator can just ignore the site, and move on to the next position to be scanned. If a target lock is achieve, then the conventional metal detector can be used to quickly search the designated spot in order to pinpoint and recover the target. A target lock is achieved when the SYSTEM B, which is free floating on its handle, points to a particular area resisting from pointing away from it even when the operator swings past it. Easiest way to mentally picture a target lock is this : if you hold a campass in your hand, the needle will point NORTH. If you change the position of the compass, regardless of how you rotate it, the needle will resist the change, and still point to the original North position. The B reacts basically the same way. In order to minimize the target area, the operator can take several readings from various positions, taking note of where the visual lines from each position intersect. That will be the general area of target position. Now the operator needs to pinpoint the target center by searching a small area. The B is mostly designed to find somewhat large targets, but numerous EXPERIENCED operators are able to locate small targets as well. The B is not a comventional metal detector and does not work as one. If you never used long range equipment, you will need to spend some time learning what the instrument is trying to tell you before you become proficient with it. If you are not the patient type willing to spend time in the field with it and expect this to be your personal “magic wand”, then this is not for you. Distance and depth of the instrument is largely dependent on size of targets and lenght of time in the ground. Freshly buried targets or “test targets” setting above the ground will not generate strong pulls or target locks. LONG BURIED TARGETS will produce a strong signal. This is due to the fact that over time a strong chemical reaction takes place between the metal and the minerals in the ground. Longer a target is buried, the stronger the pull. Small target from surface to 4 feet, distance 100 feet plus. Medium target depth up to 8 feet, distance 250 feet. Large target up to 12-15 feet, distance 1000 feet plus. Keep in mind these are general specs, dependent on various conditions such as: operator ability, ground minerals, dry or wet ground, how long target is buried, type of metal, size of target, interference, and various other factors. BOOSTER NOT VISIBLE IN PICTURES. Occasionally we will make an exception to this, if a valid reason is stated, but only if the item is unopened AND UNUSED. PLEASE NOTE : These do not work like regular metal detectors, as they DO NOT emit sound due to the presence of a target. All targets are denoted by the movement of the instrument. It will take time for a first time user to learn proper procedures, balancing, and target locks. These require a certain amount of time and patience to learn proper operation. The item “TESOROS DE ORO Y PLATA IN MEXICO LONG RANGE METAL DETECTOR DEEP SEARCH 10 METROS” is in sale since Saturday, June 1, 2019. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detectors”. The seller is “sphinxit3″ and is located in PA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Antigua and barbuda, Aruba, Saint lucia, Barbados, Bangladesh, Brunei darussalam, Bolivia, Egypt, Guadeloupe, Iceland, Cambodia, Sri lanka, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Belize, Dominica, Grenada, Saint kitts and nevis, Montserrat, Turks and caicos islands, Bermuda, Ecuador, French guiana, Guernsey, Gibraltar, Jersey, Jordan, Cayman islands, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua.
- Country/Region of Manufacture: United States
- Type: Handheld
- MPN: Does Not Apply
- Brand: Electroscopes by Thomas
- Intended Use: General Purpose
New, unused, laminated Long Range target/Tactical stock with Accublock from Stocky’s for a Short Action Remington 700 BDL. Completely finished and unaltered – never been fitted to a barreled action. The Accublock is an aluminum bedding block permanently mounted into the laminated stock, with integral bedding pillars – see pictured. Three sling swivel studs and a Pachmayr recoil pad. This is a substantial reduction from Stocky’s sale, or even special, prices. Absolutely no sales of firearms parts or accessories outside the United States. The item “New Stocky’s Accublock Long Range Target/Tactical 700 BDL SA Laminate” is in sale since Thursday, February 20, 2020. This item is in the category “Sporting Goods\Hunting\Gun Parts\Rifle”. The seller is “h*d*p*t” and is located in Cincinnati, Ohio. This item can be shipped to United States.
- For Gun Make: Remington
- Model: LRT
- Modified Item: No
- Country/Region of Manufacture: United States
- Specific Part: Stock
- Compatible Caliber: .308
- Part Material: Laminated wood, aluminum, and steel
- Type: Stock & Forend Parts
- MPN: TCT700BDL-ALU
- For Gun Model: Remington 700 SA BDL
- Brand: Stockys
So the factory roof rails are both rare, and not very good if you wish to use a full platform rack (such as a Front Runner or Rhino); you have to drill the rack + rails + shim it, as the rails are curved to match roof contour vs flat. Only aftermarket was Safety Designs, and (still) Voyager in the US, but that is old tech and both very expensive & hard to find. Pictures are of the first set produced, and there are some variables we can easily incorporate: different finishes (this was semi-gloss powder coating, but matte would look better with FR racks), or you could have it painted or powder coated to (near) match factory finish (black semi-gloss or matte included in price). The one pictured has the rails 1″ taller than “stock” allows for the carrying of a Front Runner table under FR’s rack using their table carrying accessory (this gives about 3″ of clearance at highest point of the roof). As these are built-to-order, if you wanted a lower profile the rails/feet can be fabricated down up to 2.25 if you wanted a low profile. Other options are minor things like the P38 logo can be deleted. Front of the rails have 2 mounting holes and two L brackets are included to allow for mounting a light bar or wind deflector. See my other listing if you just want a set of the plans to fabricate your own. These rails will work with some Thule or Yakima (or similar) racks that have a bottom channel that allows them to be mounted to the rails I would recommend a minimum of three cross bars for rigidity. With a platform rack, the entire system is incredibly solid—a RTT wouldn’t be any issue at all, and I’ve had almost 500lbs up there with zero issues. No cross bars or rack included. You will need to tell me what platform rack you are putting on your P38 as there are slight mounting differences between Rhino, Front Runner, etc. The rack shown is a slightly modified Front Runner LR3/LR4 rack–modification was the removal of 8 of length (about a 30 minute job with a hacksaw + metal file). The item “Range Rover P38 Roof Rails Rack” is in sale since Wednesday, July 10, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “mikopdah_0″ and is located in Pasadena, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Montserrat, Bangladesh, French guiana, Guernsey, Jersey, Liechtenstein, Monaco, Macao, Martinique, Pakistan.
- Country/Region of Manufacture: United States
- Weight Capacity: 500lbs
- Material: Steel
- Number of Pieces: 4
- Type: Roof Rail Rack
- Features: Adjustable
- Color: Black
- Surface Finish: Powder-Coated
- Manufacturer Part Number: P38RRFR
- Placement on Vehicle: Roof
- Brand: P38 Customs
- Fitment Type: Direct Replacement
- Warranty: 60 Day
- Mounting Hardware Included: Yes
UBIQUITI UniFi AC Long Range, UAP-AC-LR, 1317 Mbps AP/Hotspot 2,4/5 GHz, 802.11ac, MIMO 3×3 – indoor, Package includes 24V Gigabit PoE adapter. The UniFi AC LR AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for long-range deployment of high-performance wireless networks. Dual-Radio Performance, Gigabit Speeds. The UniFi AC Long Range delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquitis disruptive pricing strategy. The UniFi AC Long Range can work with wireless data transfer up to 1317 Mbps, standard 802.11a/b/g/n/ac is supported, UniFi uses MIMO 3×3 antennas system 3dBi. The signal range is up to 183 m. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high transmit power does for connecting distant clients. Scalable Enterprise Wi-Fi Management. The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field. Package includes 24V GigE PoE adaptor. Dimensions: 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70). Weight: 240 g (8.5 oz). Weight With Mounting Kits: 315 g (11.1 oz). Networking Interface: (1) 10/100/1000 Ethernet Port. Antennas: (1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi. Wi-Fi Standards: 802.11 a/b/g/n/ac. Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return). Power Supply: 24V, 0.5A Gigabit PoE Adapter. Maximum Power Consumption: 6.5W. Maximum TX Power: 2.4 GHz, 24 dBm. 5 GHz, 22 dBm. BSSID: Up to Four per Radio. Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES). Certifications: CE, FCC, IC. Mounting: Wall/Ceiling (Kits Included). Operating Temperature: -10 to 70° C (14 to 158° F). Operating Humidity: 5 to 95% Noncondensing. Advanced QoS: Per-User Rate Limiting. Guest Traffic Isolation: Supported. WMM: Voice, Video, Best Effort, and Background. 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps. 802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40). 802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80). 802.11b: 1, 2, 5.5, 11 Mbps. 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps. The item “Ubiquiti UAP-AC-LR Unifi Long Range WiFi PoE Wireless Access Point, 802.11ac New” is in sale since Sunday, December 9, 2018. This item is in the category “Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points”. The seller is “wifi-stock” and is located in Kaunas. This item can be shipped worldwide.
- Network Connectivity: Wireless-Wi-Fi 802.11ac
- Model: UAP-AC-LR
- MPN: UAP-AC-LR
- Country/Region of Manufacture: United States
- Brand: Ubiquiti Networks
- Max. Wireless Data Rate: 1317Mbps
- Dimensions: 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70″)
- Weight: 240g
