Categories

Monthly archives "July 2019"

PR-82 Sonic Tester, Range in Steel 0.63 to 199.99 mm / 0.040 to 1.50 in

  • July 21, 2019 at 8:52 am
PR_82_Sonic_Tester_Range_in_Steel_0_63_to_199_99_mm_0_040_to_1_50_in_01_ics
PR-82 Sonic Tester, Range in Steel 0.63 to 199.99 mm / 0.040 to 1.50 in

PR-82 Sonic Tester, Range in Steel 0.63 to 199.99 mm / 0.040 to 1.50 in
The Checkline PR-82 Sonic Tester, Range in Steel: 0.63 to 199.99 mm / 0.040 to 1.50 in is the first affordable Sonic Tester, utilizing state-of-the-art digital technology to produce fast and accurate readings. It requires no special training to operate. Unlike calipers, the PR-82 will measure where there is access to only one side. This makes it valuable when measuring roll cage thickness, cylinder walls (before and after boring) and heads during porting. The PR-82 measures in two modes. The first mode takes a measurement at the point you place the probe. The second is the Scan mode, which is helpful when measuring cylinder walls and roll cages. Place the probe at the bottom of the cylinder and drag it to the top, the gauge will display the thinnest reading measured. The Checkline PR-82 Sonic Tester, Range in Steel: 0.63 to 199.99 mm / 0.040 to 1.50 in is a lightweight, rugged tool that is resistant to water and oil. Other features include a backlit LCD and a bar graph to indicate signal stability. Four readings per second for single point measurements or 16 per second in SCAN mode. Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed. Measures cylinder wall thickness, deck height, chassis tubing & more. Cylinder’s & Pitting, Head Ports & Pipe, Roll Cages, Body Panels, Chasis, Variety of Applications. Measures from 0.040 to 1.50 inches (0.63 to 199.99 millimeters) in casted materials. 001 inches (0.01mm). /ms – 1250 to 9999 meters/sec. Dual Element (1 to 10 MHz). Two 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 200 hours on alkaline and 130 hours on NiCad. If idle 5 min. Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions. Sealed membrane that is resistant to both water and petroleum products. Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). 20 to 120F (-20 to 50C). 2.5 W x 4.5 H x 1.24 D inches. CE Approved, Factory calibration traceable to national standards. The item “PR-82 Sonic Tester, Range in Steel 0.63 to 199.99 mm / 0.040 to 1.50 in” is in sale since Wednesday, May 22, 2013. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Sound Level Meters”. The seller is “abq-ndt” and is located in Tomball, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Panama, Jamaica, Bahamas, Viet nam, Uruguay, Brazil, Bolivia, Ecuador, Cayman islands, Oman, Peru, Paraguay.
  • MPN: PR-82
  • Manufacturer: Checkline
  • Country of Manufacture: United States
  • Brand: Checkline

PR-82 Sonic Tester, Range in Steel 0.63 to 199.99 mm / 0.040 to 1.50 in

TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7

  • July 20, 2019 at 8:51 pm
TeraFlex_Low300_Low_Range_Dana_300_Gear_Set_Kit_Manual_For_1981_1986_Jeep_CJ7_01_jnud
TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7
TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7

TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7
This is a brand new TeraFlex – Low300 Gear Set Kit – Manual. We are an Authorized Dealer of TeraFlex and carry the full line of products. Fits the following applications. 81-’86 Jeep CJ-7. TeraFlex – Low300 Gear Set Kit – Manual. The TeraFlex Low300 low range gear kit is a true 4.0:1 low-range gear kit. This low-range gear replacement kit combines the Dana 300s case strength and durability and allows the Jeep owner to enhance trail performance by maximizing the low range crawl ratio. This kit provides rock-crawling performance without affecting high range gears for daily drivers, or the trip to and from the back country. This kit is easy to install. There are no driveshaft changes, or special shift linkages required. It comes complete as a 5 gear set, and includes all necessary gaskets and seals, and a new shift rail with increased detent pockets (to help twin stick applications shift smoother, and with more accuracy). The Low300 kit for Scouts require some internal case grinding. We appreciate your business. To make your shopping experience as simple and easy as possible, please refer to our company policies shown below. Tracking numbers are updated manually, so please allow enough time for your information to be entered after your order has been placed. AZ Offroad & Performance, Inc. & will do everything possible to ensure the customer’s satisfaction. We are not responsible for install mistakes. The RA # must be on the outside of each package with the RA # in a visible area. Any package without the RA # will be refused. The item “TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7″ is in sale since Thursday, September 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “azoffroadperformance” and is located in Phoenix, Arizona. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Dana 300 4 to 1
  • Manufacturer Part Number: 2123000
  • Other Part Number: 4.0:1 low-range gear kit
  • Brand: TeraFlex
  • Warranty: Yes

TeraFlex Low300 Low Range Dana 300 Gear Set Kit Manual For 1981-1986 Jeep CJ7

P38 Range Rover roof rack includes shovel mount and axe mount (NEW)

  • July 20, 2019 at 8:50 am
P38_Range_Rover_roof_rack_includes_shovel_mount_and_axe_mount_NEW_01_rzs
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
P38 Range Rover roof rack includes shovel mount and axe mount (NEW)

P38 Range Rover roof rack includes shovel mount and axe mount (NEW)
Land Rover P38 Range Rover Roof Rack (NEW). Includes axe and shovel mount. True 4 ft wide capacity. Designed to carry full sized 4 x 8 steel plates or plywood. Mounts to the stock P38 slide open rack mounts. Multiple cross bars are re-movable and interchangeable to allow for different configurations including sunroof access or sunroof protection. This was specifically designed to fit a 1997 P38 although it fits a variety of model years. Contact me if you have questions. SHIPS FREE TO ANYWHERE IN THE CONTINENTAL USA. 1 Medium flat rate box (hardware). 11″ x 8-1/2″ x 5-1/2. (2) package 9 Lbs 11 x 2 x 56 (wind deflector). (3) package 31 Lbs 48 x 9 x 8. (4) package 32 Lbs 34 x 7 x 9. All dimension are in inches and US pounds. All hardware is included. Simple tools and some assembly required. We have an extensive web page to help with assembly. Made in the USA. The item “P38 Range Rover roof rack includes shovel mount and axe mount (NEW)” is in sale since Wednesday, June 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Racks”. The seller is “fnfab” and is located in Azusa, California. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Surface Finish: Powder coat
  • Manufacturer Part Number: FNFAB062
  • Brand: Fred Nelson Fabrication
  • Warranty: Yes

P38 Range Rover roof rack includes shovel mount and axe mount (NEW)

Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW

  • July 19, 2019 at 8:49 pm
Range_Rover_RR_Sport_2013_L405_2014_L494_DVD_Headrest_8_HD_Monitor_Pair_NEW_01_xap
Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW
Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW
Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW
Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW

Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW
Frustrated that the Range Rover you had built doesn’t include rear seat entertainment for your particularly active back seat occupants? Well, we have a solution for that. This listing is for a pair of brand new Invision brand 8 pre-installed headrest HD monitors with internal DVD players for your Land Rover Range Rover L405 2013+ or Range Rover Sport L494 2014+. So what exactly do you get? This kit includes a pair of headrests from our Land Rover distributor with pre-installed entertainment system monitors each with its own built in DVD player. In addition to the headrests and monitors you also have the wiring harnesses so you can connect them to any video input device you choose (Playstation, DVD, VCR, TV, whatever you want), however. Each monitor also has its own DVD player built it. Also included are a pair of game controllers (with over 50 built-in game software), a remote, and pair of headphones just like the ceiling mounted genuine Land Rover kit which we also offer. You don’t have to do any modifying as the headrests are OE Land Rover headrests and integrate perfectly with your existing arrangement. 8 LCD HD Screen. IMPORTANT : Please specify your upholstery and piping colors as we don’t want to provide you with a pair of headrests that don’t match your interior. If you’re unsure of the proper color terminology then please send a pic or your VIN and we’ll figure it out for you. Also, we can provide them for the luxury/premium seats also, but the cost is more. Check out our extensive selection of great Land Rover parts and accessories by going to our store. Track Page Views With. Auctiva’s FREE Counter. The item “Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW” is in sale since Monday, February 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Other In-Car Entertainment”. The seller is “euroactive” and is located in Olyphant, Pennsylvania. This item can be shipped worldwide.
  • Brand: Invision
  • Manufacturer Part Number: INV-L405-L494
  • Warranty: Yes
  • Country/Region of Manufacture: United States

Range Rover & RR Sport 2013+ L405 2014+ L494 DVD Headrest 8 HD Monitor Pair NEW

Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners

  • July 19, 2019 at 8:48 am
Viking_VGIC_3676BSS_S_Steel_Convection_Oven_Range_Hood_36_6_Sealed_Burners_01_kdhp
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners

Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners
Viking VGIC3676BSS Stainless Steel 36 Range & Convection Oven 6 Sealed Burners & Viking Professional Hood. This range/hood was acquired from a remodel project and is in great working condition. No faded decals and the grates look used but this unit has been thoroughly cleaned. Please see all Photos for details and condition plus what it looked like in its original sitting. This item listed is in great working condition. All, items and contents are described to the best of my ability. I examine all items and supply all available Make/Model information. I appreciate you taking your time to leave a Feedback. I would appreciate the opportunity to work with you before leaving less than 5 stars. I strive for 5 Star ratings. I APPRECIATE YOUR BUSINESS. The item “Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners” is in sale since Tuesday, September 4, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Ranges & Stoves”. The seller is “coogs00″ and is located in Belvidere, New Jersey. This item can’t be shipped, the buyer must pick up the item.
  • Number of Burners: 6
  • Brand: Viking
  • Custom Bundle: No
  • Model: VGIC367-6BSS
  • Energy Star: Compliant
  • Type: Range
  • Fuel Type: Gas
  • Surface: Stainless Steel
  • Country/Region of Manufacture: United States
  • Finish: Stainless Steel
  • Width: 36 in.
  • Number of Ovens: Single Oven
  • Features: Sealed Burners

Viking VGIC 3676BSS S. Steel Convection Oven/Range & Hood 36 6 Sealed Burners

36 Berenice Copper Range Hood-Made in U. S. A

  • July 18, 2019 at 8:47 pm
36_Berenice_Copper_Range_Hood_Made_in_U_S_A_01_iri
36 Berenice Copper Range Hood-Made in U. S. A
36 Berenice Copper Range Hood-Made in U. S. A
36 Berenice Copper Range Hood-Made in U. S. A
36 Berenice Copper Range Hood-Made in U. S. A

36 Berenice Copper Range Hood-Made in U. S. A
Berenice Copper Kitchen Range Hood. Berenice Range Hood is simple and elegant. Adding rustic touches to your kitchen will make you feel like you’re cozied up in a Tuscan farmhouse or an English cottage. You’ll love the warm and homey personality copper will bring. Beautiful lacquered copper patina surface is easy to maintain and will hold it’s color for years of enjoyment. Open back and top allows for either venting application. Each range hood is made from a single sheet of copper, by hand, one at a time. Range hood does not include a blower insert system. If you are looking for a high quality custom range hood made 100% in the USA, look no further. Tell us your kitchen specifications and we’ll build a range hood of your dreams. We won’t build, unless you love it! Check out reviews and you’ll be glad to hear our success story of father and son business. Our range hoods are made from a single sheet of cold rolled copper, by hand, one at a time, per each order. Did you know that all of our competitors use annealed copper that is recycled and very soft? Ask them to verify their copper supplier and if they fall within the guides of Copper Development Association. You won’t have to worry about us, all of our materials are locally sourced. Genuine USA Copper: 36 oz. Due to high demand, current lead-time is about. We take an effort to see that nothing is overlooked but that every small detail receives attention! Check out our other listing! We are all custom company! 100% Hand Made in Washington! Feel free to send us a message. The item “36 Berenice Copper Range Hood-Made in U. S. A” is in sale since Tuesday, June 21, 2016. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Range Hoods”. The seller is “theartofrain” and is located in Vancouver, Washington. This item can be shipped to United States.
  • Hood Material: Copper
  • Country//Region of Manufacture: United States
  • Model: Berenice
  • Country/Region of Manufacture: United States
  • Height: 26in.
  • Depth: 21in.
  • Type: Oven Range Hood
  • Color: Old Penny Patina
  • MPN: BRN-1
  • Hood Width: 36in.
  • Brand: Art of Rain
  • Design: Berenice

36 Berenice Copper Range Hood-Made in U. S. A

Milestone Herbicide 1 Quart GRASS RANGE WEED KILLER

  • July 18, 2019 at 8:45 am
Milestone_Herbicide_1_Quart_GRASS_RANGE_WEED_KILLER_01_xgtk
Milestone Herbicide 1 Quart GRASS RANGE WEED KILLER

Milestone Herbicide 1 Quart GRASS RANGE WEED KILLER
Milestone Herbicide (1 Quart). Milestone is a broadleaf herbicide for Range and Pasture control. Provides superior control of many noxious and invasive weed species, including biennial and perennial thistles, knapweeds and yellow star thistle. The new standard for tropical soda apple control (including residual seedling control). Specifically designed for range land and pasture use. Excellent post-emergence and season-long residual control. Controls many annual, biennial and perennial weeds at low use rates (4-7 ounces per acre). Non-volatile, non-2,4-D formulation. Systemic and residual activity effectively controls weeds at multiple growth stages. Safe to desirable grasses. Ideal foundation herbicide; excellent tank-mix partner with brush control products, such as PastureGard or Remedy herbicides. No grazing restrictions for any type of livestock or wildlife, including lactating dairy animals, beef cattle, sheep, goats and horses. Is not a federally restricted use pesticide. Approximate use rate: 4-7 ounces per acre (small batch: 0.25-0.5 teaspoon per gallon of water). See label for specific use rate based on targeted grass or weeds size. Aminopyralid: 2-pyridine carboxylic acid, 4-amino-3,6-dichloro-2-pyridinecarboxylic acid, triisopropanolammonium salt of aminopyralid………. Acid Equivalent: aminopyralid (4-amino-3,6-dichloropyridine-2-carboxylic acid) – 21.1% – 2 lb/gal. If your state is not listed, there are no restrictions in your state. Restricted – No sales to State. The item “Milestone Herbicide 1 Quart GRASS RANGE WEED KILLER” is in sale since Wednesday, December 27, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Weed & Pest Control\Weed Control\Herbicides & Fungicides”. The seller is “keystonepestsolutions” and is located in Bonners Ferry, ID or Jamestown, PA. This item can be shipped to United States.
  • Brand: Dow Agro Sciences
  • Country/Region of Manufacture: United States
  • MPN: 62719-519
  • Bundle Listing: No

Milestone Herbicide 1 Quart GRASS RANGE WEED KILLER

6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles

  • July 17, 2019 at 8:44 pm
6in_1_2in_AR500_Steel_Shooting_Range_Targets_Dueling_Trees_Metal_Paddles_01_hhh
6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles
6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles

6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles
For the Best Prices and Widest Selection! Set includes six 6 inch diameter round steel shooting paddles for DIY dueling trees. These paddles are 10 inches in length overall, ensuring sufficient upright clearance with a quick full rotation. The pins are 7/8in. To provide smooth rotation for thousands of shots. AR500 steel targets are great for most pistol rounds, including magnum calibers. Targets made from 1/2in. AR500 plate are rated to 3000fps at 100yards. Steel targets are painted white for illustration only. Targets provided will not be painted. Steel shooting targets are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life. Reversible steel target face doubles the life of the shooting target. Emails will be responded to within 24 hours or less. Shooter and spectators must always wear proper eye and hearing protection. Recommend minimum distances from steel targets to shooter are 15 yards for pistols and 100 yards for HP rifles. These steel shooting targets are not designed for use with shotgun slugs, steelshot, BBs, armor-piercing, steel-core, or other hardened ammunition. Do not use a steel target that has been deformed or damaged. The item “6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles” is in sale since Wednesday, November 1, 2017. This item is in the category “Sporting Goods\Hunting\Range & Shooting Accessories\Targets”. The seller is “arkcusmfg68″ and is located in Bauxite, Arkansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Saint kitts and nevis, Bolivia, Iceland, Cambodia, Oman, Peru, Paraguay, Viet nam, Uruguay.
  • Country of Manufacture: United States
  • Model: DT66HAR5
  • MPN: DT66HAR5
  • Country/Region of Manufacture: United States
  • Brand: Magnum Target
  • Type: Dueling Tree Target

6in. 1/2in. AR500 Steel Shooting Range Targets Dueling Trees Metal Paddles

Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot

  • July 17, 2019 at 8:43 am
Outdoor_100_Mile_Range_Antenna_Channel_Master_Deep_Fringe_UHF_VHF_FM_TV_Best_Hot_01_pv
Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot
Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot
Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot

Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot
Deep Fringe Advantage 100-Mile Range Outdoor Antenna The Channel Master CM 3020 is an outdoor TV antenna that is designed for deep fringe reception areas and will allow you to receive UHF, VHF, FM and HD signals. Superior signal strength in weak signal locations. Reception range: channels 2 thru 69 up to 100 miles. Picks up UHF, VHF, FM and HD. Antenna size: 152 x 95 x 22 in. The item “Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot” is in sale since Wednesday, January 30, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Antennas”. The seller is “your365store” and is located in United States, United States. This item can be shipped to United States.
  • Max. Range: 100 miles
  • Model: Antenna. 001
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Signals Received: FM
  • ISBN: Does not apply
  • Type: TV Antenna
  • UPC: 020572030205
  • EAN: 020572030205
  • Features: High definition compatible
  • Non-Domestic Product: Yes
  • Applicable Regions: United States
  • Number of Outputs: 2
  • MPN: CM-3020
  • Reception range: channels 2 thru 69 up to 100 miles
  • Antenna size: 152 x 95 x 22 in.
  • Electronics Included Components: No additional items included
  • Antenna Gain (dB): 9
  • Returnable: 30-Day
  • Frequency Band: X
  • Indoor/Outdoor: Outdoor
  • Brand: Channel Master

Outdoor 100-Mile Range Antenna Channel Master Deep Fringe UHF VHF FM TV Best Hot

Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag

  • July 16, 2019 at 8:42 pm
Advantage_Arms_Gen_1_3_for_Glock_17_22_31_34_35_Conversion_22LR_Range_Bag_01_nhva
Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag
Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag
Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag

Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag
Fits Gen 1 – 3 GLOCK 17, 17L, 22, 24, 31, 34, 35 & 37 LE17-22 with Range Bag. 22 LR conversion kit. The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. LAST ROUND LOCK OPEN. The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on’Advantage Arms’. 22LR Conversion Kits for the GLOCK pistol. INTERNAL FIRING PIN SAFETY. Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. THE 10 SECOND INSTALLATION. Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. COMPATIBILITY OF OUR CONVERSION KITS FOR GLOCK PISTOLS Our Conversion Kits are made to work on FACTORY STOCK Glock frames. Note: Aftermarket parts such as trigger bars and connectors, especially the Ghost Connector, can adversely affect the function and reliability of your conversion kit. We highly recommend Remington “Golden Bullets” for everyday plinking and CCI MiniMags or Federal Automatch for better accuracy. Stock photos of similar item you will receive. For PR VI Guam etc. Please use United States for country. Terms of Sale: Before leaving feedback, if you need to return your product or if you have any issues or concerns. Thank you in advance for your understanding. About Us: We at Three Rivers Supply, appreciate all our customers. We will do our best for you to have an enjoyable experience at Three Rivers Supply. If you like what you see, please save our store on your favorites list! We will respond asap. The item “Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag” is in sale since Thursday, November 30, 2017. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “threeriverssupply” and is located in Reynolds, MO. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Bundle Listing: No
  • Number of Rounds: 10
  • Specific Part: Conversion Kit
  • Brand: Advantage Arms
  • Model: Fits Gen 1 – 3
  • For Gun Model: Glock 17
  • For Gun Make: GLOCK
  • Custom Bundle: No
  • MPN: AAC1722G3

Advantage Arms (Gen 1-3) for Glock 17 22 31 34 35 Conversion 22LR Range Bag